Наука та прогрес транспорту.

Permanent URI for this communityhttp://crust.ust.edu.ua/handle/123456789/1665

У даному репозитарії представлені електронні версії статей, автори яких є членами співтовариства університету.
Повний випуск кожного видання доступний http://stp.ust.edu.ua/
до 2013 року виходив під назвою "Вісник Дніпропетровського національного університету залізничного транспорту імені академіка В. Лазаряна"

Science and Transport Progress.
This repository contains e-articles whose authors are members of the community of the university.
Full version http://stp.ust.edu.ua/
until 2013 appeared under the title "Bulletin of Dnepropetrovsk National University of Railway Transport named after Academician V. Lazaryan"

Browse

Now showing 1 - 3 of 3

Analysis of Influence of Design Characteristics of Inclined Bucket Elevator on the Power of Its Drive
(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2016) Bohomaz, Volodymyr M.; Borenko, Mykola V.; Patsanovskyi, S. V.; Tkachov, O. O.
ENG: Purpose. One of the main elements of the inclined belt bucket elevators is their drive. To determine the drive power, it is necessary to carry out calculations according to standard methods, which are described in the modern literature. The basic design parameters are the productivity, lifting height, type and properties of the transported material, the angle of inclination. It is necessary to build a parametric dependence of the driving power of the elevator on its design parameters, which takes into account the standard sizes and types of buckets and belts. Methodology. Using the methodology of traction calculation of inclined belt bucket elevator there were built parametric dependences of efforts in specific points of the route of the elevator, as well as the parametric dependences of the drive power of high-speed elevators with deep and shallow buckets on their design parameters and characteristics. Findings. On the basis of constructed parametric dependencies, it was found that the function of changing the value of the elevator’s power from design capacity (at fixed lifting height, type of cargo, belt speed) is piecewise constant and monotonically increasing. It was built a graphical representation of elevator drive power on the angle of its inclination within acceptable limits of change. The resulting relationship is non-linear and monotonically decreasing. In general terms the intervals of project performance values, which provide a constant value of drive power of inclined elevator were defined. As an example of the obtained results it was observed the process of dependence construction of the drive power on design capacity and inclination angle of the elevator for transporting the fine coal. Originality. For the first time there were constructed the parametric dependences of drive power of inclined bucket elevator on its design parameters that take into account the standard sizes and types of buckets and belts. Practical value. Using the constructed dependencies enables relatively quick determination of the approximate value of the drive power of high-speed inclined elevators with deep and shallow buckets at the design stage and highquality selection of its basic elements in the design of specific characteristics: type of cargo, productivity, lifting height, angle of inclination.
Research of Dependence of Belt Conveyer Drive Power on Its Design Parameters
(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпропетровськ, 2016) Bohomaz, Volodymyr M.
ENG: Purpose. A drive is one of the basic elements of belt conveyers. To determine the drive power it is necessary to conduct calculations by standard methodologies expounded in modern technical literature. Such calculations demand a fair amount of time. The basic design parameters of a belt conveyer include type of load, design efficiency, geometrical dimensions and path configuration, operation conditions. The article aims to build the parametric dependence of belt conveyer drive power on its design parameters, that takes into account standard dimensions and parameters of belts, idlers and pulleys. Methodology. The work examines a belt conveyer with two areas: sloping and horizontal. Using the methodology for pulling calculation by means of belt conveyer encirclement, there are built parametric dependences of pull forces in the characteristic conveyer path points on the type of load, design efficiency, geometrical dimensions and path configuration, operation conditions. Findings. For the belt conveyers of the considered type there are built parametric dependences of drive power on type of load, design efficiency, geometrical dimensions and path configuration, operation conditions, taking into account the belt standard dimensions and corresponding assumptions in relation to idler and pulley types. Originality. This is the first developed parametric dependence of two-area (sloping and horizontal) belt conveyer drive power on type of load, design efficiency, geometrical dimensions and path configuration, operation conditions that takes into account standard dimensions and parameters of belts, idlers and pulleys. Practical value. Use of the built drive power dependences on design parameters for the belt conveyers with sloping and horizontal areas gives an opportunity of relatively rapid determination of drive power approximate value at the design stage. Also it allows quality selection of its basic elements at specific design characteristics and requirements. The offered dependences can be used for determination of general character of drive power dependence on the project efficiency.
Research of Influencing of Project Discriptions of Elevator on Parameters of Its Drive
(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпропетровськ, 2015) Bohomaz, Volodymyr M.; Hlavatskyi, Kazymyr Ts.; Mazur, O. A.
ENG: Purpose. One of basic elements of band bucket elevators is their drive. For determination of power drive it is necessary to conduct calculations on standard by methods, in what it is needed to expend enough time. One of project parameters is productivity of elevator. It is necessary to build parametric dependence of power drive of elevator on its design capacity that takes into account a type and descriptions of load, lifting height, standard sizes and parameters of buckets and tapes. Methodology. Using the method of hauling calculation of band buckets elevators, the parametric dependences of power drive of high-speed elevators are built with deep and shallow buckets from their productivity at fixed type of load and height of getting up. Findings. It is set on the basis of the built parametric dependences that the change function of a size of elevator power from design capacity (at fixed to the lifting height, load type, rate of tape movement) is piecewise and droningly increasing. The intervals of project values of productivity, which provide the permanent size of elevator power drive are certain in a general view. As the example of application of the recived results the construction process of power drive dependence from design capacity of elevator of shotblasting room, which is intended for transporting of the metallic shot using for consolidating of carriage springs, is considered. For concrete type of load and lifting height of such elevator graphic dependence of power drive on productivity was built. Originality. Parametric dependences of elevator power drive on its design capacity were first built, which take into account a type and physical and mechanical descriptions of load, lifting height, standard sizes and parameters of buckets and tapes. Practical value. The use of the built dependences enables in relation to rapid determination of approximate value of power drive of vertical high-speed elevators with deep and shallow buckets on the stage of planning and to execute the high-quality selection of its basic elements at concrete project descriptions: type of load, productivity, lifting height.