Кафедра Гідравліка, водопостачання та фізика (З 2022 року кафедра створена шляхом злиття кафедри Гідравлика та водопостачання та кафедри Фізика)
Permanent URI for this community
UK; Кафедра Гідравліка, водопостачання та фізика
EN: Department Hydraulics, water supply and physics
EN: Department Hydraulics, water supply and physics
Browse
Browsing Кафедра Гідравліка, водопостачання та фізика (З 2022 року кафедра створена шляхом злиття кафедри Гідравлика та водопостачання та кафедри Фізика) by Author "Biliaieva, Viktoriia V."
Now showing 1 - 5 of 5
Results Per Page
Sort Options
Item Identifying Regularities in the Propagation of Air Ions in Rooms with Artificial Air Ionization(PC TECHNOLOGY CENTER, 2023) Levchenko, Larysa; Burdeina, Nataliia; Glyva, Valentyn; Kasatkina, Natalia; Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Tykhenko, Oksana; Petrunok, Tetiana; Biruk, Yana; Bogatov, OlegENG: The object of the study is the dynamics of air ion spread in rooms from the source of artificial air ionization under different starting conditions. There is currently the problem of distribution of air ions in the room with regulatory concentrations in all critical zones. An effective method of ensuring proper air ion concentrations is to model their propagation from ionization sources. Existing approaches to calculating the dynamics of air ions of both polarities have been improved in this study. Unlike known solutions, the impact on their concentration of electrostatic field and the interaction of air ions with suspended particles was taken into account. A model of air ion propagation in rooms with artificial air ionization and the principles of its numerical modeling was built. The use of Laplace Equation in the aerodynamic model instead of the Navier-Stokes equation for the potential of the flow rate has made it possible to design an "Ion 3D" tool, which reduces the time of implementation of one scenario from several hours to 7 seconds. Modeling of the propagation of air ions of both polarities in the room under different initial conditions was carried out. Two-dimensional and three-dimensional models with their visualization was implemented. The peculiarity of the resulting models is that they make it possible to determine the concentrations of air ions in any section of the room by three coordinates. Given this, the rapid selection of the variants of the source data makes it possible to achieve the normative values of concentrations of air ions in the area of breathing – exceeding 500 cm-3 of each polarity. Simulation makes it possible to design a room in which, under the condition of artificial ionization of air, the concentrations of air ions close to the optimal values of 3000–5000 cm-3 are provided.Item Methodology for Modeling the Spread of Radioactive Substances in Case of an Emergency Release at a Nuclear Power Plant(National Technical University «Kharkiv Polytechnic Institute», Kharkiv, 2023) Levchenko, Larysa; Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Ausheva, Nataliia; Tykhenko, OksanaENG: The methodology for modeling the propagation of accidental releases of radionuclides from a power unit of a nuclear power plant has been developed. The calculation method takes into account the most critical factors propagation cloud - wind direction and speed, the intensity of the release radionuclides change: semi-continuous release, long-term release, instantaneous release. Diffuse processes and the presence of interference in the form of buildings were also taken into account. To solve the modeling equation of the aerodynamic model, the velocity potential equation is solved. The use of this equation instead of the traditional Novier-Stokes equation makes it possible to rationalize the calculation process in terms of the speed obtaining simulated data. To build a numerical model, a rectangular difference grid is used. The velocity potential and the quantities values of volumetric activity are determined at the centers of difference cells. The value of the airflow velocity vector component is determined on the sides of the difference cells. A finite-difference splitting scheme is used for numerical integration of the equation convective-diffusion transfer radionuclides. A computer code was developed on the basis of the constructed numerical model, the programming language Fortran was used. The approach used makes it possible to reduce the time for obtaining one scenario of an accident development. The cloud propagation dynamics determining is carried out almost in real time. This allows you to quickly respond to changing situations and make adequate decisions.Item Modeling Influence of TiO2 Barrier Coating on Pollutant Dispersion Near Road(Kaunas University of Technology, 2023) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia; Yakubovska, Zinaida M.ENG: Mitigation strategies for near-road air pollution are of great interest nowadays. Sound barriers near the road are very effective to decrease pollutant concentration. The use of titanium dioxide (TiO2) barrier coating provides additional effect which allows to decrease pollutant concentration near road. In this study quick- computing CFD model was developed to access influence of TiO2 barrier coating on pollutant concentration. To simulate wind flow over barrier with TiO2 coating model of potential flow was used. The process of NOx dispersion from car was computed using mass conservation equation. Finite-difference schemes were used for numerical integration of governing equations. The computer code was developed on the basis of proposed numerical model. Results of numerical simulations are presented.Item Prediction of Atmospheric Air Pollution Near a Coal Stack in Adverse Weather Conditions(IOP Publishing Ltd, 2023) Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Nochvai, Volodymyr; Yakubovska, Zinaida M.; Oladipo, Mutiu OlatoyeENG: Coal piles on the territory of enterprises are long-term sources of dust pollution of atmospheric air. Forecasting the level of dust pollution of the air for such objects is carried out, as a rule, for convection conditions. But during inversion, very high concentrations of dust can occur on industrial sites. The task of assessing the level of dust pollution of atmospheric air at an industrial site during dust emission in conditions of inversion from a coal stack is considered. A three-dimensional equation of convective-diffusion dispersion of contamination in atmospheric air, compatible with the approach of Prof. Berliand M. on determining the value of the vertical diffusion coefficient in the surface layer of the atmosphere for the case of inversion, to model dispersion of dust from a coal stack under inversion conditions is used. Numerical integration of the modeling equation of convective-diffusion transport of contamination is carried out on the basis of the splitting method compatible with the use of a locally one-dimensional finite-difference scheme. The results of a computational experiment to determine dust pollution zones at the Prydniprovsk thermal power station are presented.Item Simulation of Chemical Accident with Ammonia at the Pipe Line(Kaunas University of Technology, 2023) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kozachyna, Valeriia; Mashykhina, Polina B.ENG: Ammonia is transported through Ukraine via the Togliatti-Odesa ammonia pipeline. The hostilities in Ukraine pose a risk of damage to this transportation system as a result of a shell, mine, etc. hitting the transportation system. Therefore, it is very important to predict the possible consequences of environmental pollution in the event of such an extreme situation. A numerical model was developed to solve this problem. The three-dimensional equation of convective-diffusive transport of an impurity in the atmosphere is used to predict the dynamics of pollution of atmospheric air and the underlying surface. Finite-difference splitting schemes are used to numerically integrate this equation. On the basis of the constructed numerical model, a computer code was developed to take into account the change in the intensity of ammonia leakage from the damaged pipeline. The results of a computational experiment are presented.