Факультет "Промислове та цивільне будівництво" (ДІІТ)

Permanent URI for this communityhttp://crust.ust.edu.ua/handle/123456789/47

ENG: Faculty "Industrial and Civil Construction"

Browse

Now showing 1 - 25 of 25

Analysis of Temperature Field in the Transport Compartment of the Launch Vehicle
(Kaunas University of Technology, Kaunas, 2022) Biliaiev, Mykola M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Semenenko, Pavlo
ENG: The development of satellite linkage systems is based on the satellite’s transportation in space. The transportation of a satellite into orbit is carried out by a launch vehicle. The satellite is located in the transport compartment inside the main fairing. At the stage of the pre-launch preparation, it is necessary to fulfill very strict environment conditions inside the main fairing. Namely, it is very important to predict temperature field in the transport compartment inside the main fairing during its forced ventilation at the stage of pre-launch preparation. To calculate the temperature field formed by the ventilation of the transport compartment and release of heat from different elements of the satellite, the energy equation was used. This equation took into account the intensity of heat release from different parts of satellite, air flow pattern over the satellite, heat transfer in the transport compartment. The non-uniform field of the air flow velocity in the transport compartment was calculated on the basis of the potential flow model. The finite difference schemes were used for numerical integration of modeling equations. The computer code has been developed that implements the proposed numerical model. The results of computational experiments to estimate the temperature regime in the main fairing of the launch vehicle for different satellites is presented.
Application of Local Exhaust Systems to Reduce Pollution Concentration Near the Road
(Silesian University of Technology, Katowice, Poland, 2020) Biliaiev, Mykola M.; Pshinko, Oleksandr M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Sładkowski, Aleksander
EN: In this study, the methodological foundations of the technology for the local reduction of chemical pollution from vehicles were improved through the use of twolevel suction units and guide plates of various lengths installed on the nozzles of the suction devices. A program has been developed for the numerical calculation of the carbon monoxide concentration field for evaluating the efficiency of using two-level exhaust systems with different lengths of guide plates on the gas flow selection pipes. The solution of the equations of hydrodynamics and mass transfer is carried out on the basis of finite-difference methods. A number of physical and computational experiments have been carried out; it has been established that the concentration of carbon monoxide in the zone of two-level suctions location decreases by 46-68%.
Atmosphere Pollution Modeling in the Case of Accident During Rocket Propellant Transportation by Trains
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Gunko, Olena Yu.; Chernyatyeva, Kateryna
EN: Abstract. At present time, in Ukraine the intensive development of solid-propellant missiles takes place. These missiles are called «Grim», «Grim-2», etc. Transportation of rocket propellant very often is carried out by trains. In the case of accident during such transportation great amount of toxic chemicals may be emitted into atmosphere. It is very important to predict the atmosphere pollution level near railways transport corridors to obtain the realistic information about the size of possible zones of hitting. To forecast the atmosphere pollution in the case of rocket propellant burning in railway wagon numerical models have been developed. These models are developed to predict the atmosphere pollution in two scales. The first scale is the simulation of the atmosphere pollution near the railway tracks (so called “local scale”). The second scale is the simulation of the atmosphere pollution on the territory which is adjacent to the railway tracks («urban scale»). The forecast is based on the Lagrangian model of toxic chemical dispersion. The models allow also to predict acid rain formation in the case of solid propellant burning products dispersion into atmosphere. To solve the governing equations we used difference schemes of splitting. The results of numerical experiments are presented.
Computer Modeling of Air Pollution in Case of Dust Cloud Movement in Open Pit Mine
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaieva, Viktoriia V.; Kirichenko, Pavlo S.; Berlov, Oleksandr V.; Gabrіnets, Volodymyr O.; Horiachkin, Vadym M.
ENG: Purpose. Explosions in open pits lead to the formation of dust clouds. These clouds lead to intense air pollution. An important task is the development of methods for predicting the dynamics of atmospheric air pollution during ex-plosions in open pits. The purpose of this work is development of a numerical model to predict atmosphere pollution after explosion in open mine pit. The task is to develop a numerical model that would allow for the calculation to take into account the geometrical shape of the open pit mine, the parameters of the meteorological situation (wind speed, atmosphere), the shape of the dust cloud that is formed in the open pit mine at the site of the explosion. Methodology. Mathematical modeling of dust cloud dispersion during an explosion in an open pit mine is based on the use of fundamental equations of aerodynamics and mass transfer. The airflow velocity field in the open pit mine is modeled using the Laplace equation for the velocity potential. The formation of the concentration field of dust is mod-eled on the basis of the equation of convective-diffusion dispersion of an impurity. For numerical integration of model-ing equations, difference schemes are used. The Laplace equation for the velocity potential is numerically integrated using the Richardson method. For the numerical integration of the convective-diffusion dispersion equation for an im-purity, an implicit difference splitting scheme is used. Findings. A CFD model has been developed that allows you to calculate the formation of pollution zones during the movement of a dust cloud in the open pit mine. A feature of the developed model is the speed of calculation. For practical use of the developed model, standard input information is required. Originality. In contrast to the existing models in Ukraine, the developed numerical model allows taking into account the geometrical shape of the open pit mine and the geometrical shape of the dust cloud when making predictive calculations to assess the level of air pollution caused by explosions in open pits. Practical value. The developed nu-merical model can be implemented on computers of low and medium power. For practical use of the numerical model, standard information on meteorological conditions in open pit mine is required. The numerical model can be used for environmental assessment of the effect of explosions in open pit mine on environmental pollution and work areas.
Computer Simulation of Biological Wastewater Treatment Processes in Aerotanks With Plates
(Дніпровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2020) Biliaiev, Mykola M.; Lemesh, Maksym V.; Biliaieva, Viktoriia V.; Mashykhina, Polina B.; Yakubovska, Zinaida M.
EN: Purpose. Efficiency determination of the aeration tank at the stage of design or reconstruction of bioreactors in which biological wastewater treatment is carried out requires the use of special mathematical models and calculation methods. The main purpose of the article is to develop CFD models for evaluating the operation efficiency of aeration tanks. Methodology. A numerical model has been developed for the computer calculation of the biological wastewater treatment process in aerotanks, taking into account hydrodynamics. The model is based on two-level mass conservation equations for the substrate and activated sludge and the velocity potential equation. The process of biological transformation of the substrate is calculated based on the Monod model. For the numerical integration of the mass transfer equations of activated sludge and substrate, the alternating-triangular difference splitting scheme is used. In this case, the basic equations are divided into two equations of a more simplified form. For the numerical integration of the equations for the velocity potential, it is split into two one-dimensional equations. Further, each equation is solved according to explicit scheme. For the numerical integration of equations that describe the process of substrate transformation based on the Monod model, the Euler method is used. Findings. The software implementation of the constructed numerical model has been carried out. The results of a computational experiment on the study of the wastewater treatment process in an aeration tank with plates are presented. This leads to the conclusion that the quality control of wastewater treatment in aeration tanks is possible with the help of plates. Originality. A multivariate CFD model has been developed, which makes it possible to quickly assess the efficiency of the aeration tank. A feature of the model is the ability to evaluate the operation of the aeration tank, taking into account its geometric shape and location of additional plates in the construction. Practical value. The constructed numerical model can be used during calculations in the case of designing aeration tanks, or in determining the efficiency of wastewater treatment under new operating conditions.
Computer Simulation of Dead-End Mine Working Ventilation
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaieva, Viktoriia V.; Kirichenko, Pavlo S.; Gunko, Olena Y.; Bondarenko, Iryna O.; Mashykhina, Polina B.; Yakubovska, Zinaida M.
ENG: Purpose. The important problem in the field of ecological safety and industrial safety is providing of normal microclimate in dead-end mine working. In these regions of the mine methane gas can be accumulated and as a result explosion may take place. So, to avoid these accidents it is important to ventilate appropriately dead-end mine working. The purpose of the work is development of quick computing mathematical model to obtain information about dead-end mine working ventilation process. Methodology. The process of dead-end mine working ventilation computing is separated in two stages. At the first stage the velocity flow field is computed in the dead-end mine working. We consider the situation when the suction tube is situated in this region. To solve this problem the fluid dynamics model of inviscid gas flow was used. At the second stage of the computational modeling the convective-diffusive equation of admixture transfer was used. The equation takes into account non-uniform flow field in the dead end mine workings. Findings. The developed numerical model was coded using FORTRAN language. The developed computer code allows to perform numerical experiment to assess the efficiency of suction tube imple-mentation to decrease methane gas concentration in dead-end mine working. Originality. The developed numerical model takes into account physical factors, which are not considered nowadays in the empirical models, which are used for solving the problems of dead-end mine working ventilation. It allows taking into account the geometrical form of the dead-end mine working. Practical value. The developed computer program allows to perform calculations to assess the efficiency of suction system used for the ventilation of the dead-end mine working.
Computing Model for Simulation of the Pollution Dispersion Near the Road with Solid Barriers
(Silesian University of Technology, Gliwice, Poland, 2021) Biliaiev, Mykola M.; Pshinko, Oleksandr M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Sładkowski, Aleksander
ENG: In this study, a numerical model is proposed for calculating pollution zones near the road, taking into account the geometry of the automobile transport, meteorological conditions, the location of the barriers and their height, and the chemical transformation of nitrogen oxides in the atmospheric air. The numerical solution is based on the integration of the mass transfer equations using the finite-difference method. To determine the components of the air flow velocity vector, a two-dimensional model of the potential flow is used, where the Laplace equation for the velocity potential is the modeling equation. Based on this numerical model, a software package has been developed that allows computational experiments and does not require large expenditures of computer time. Based on the results obtained, an assessment was made of the effectiveness of the use of barriers to reduce the level of air pollution near highways. It has been established that the use of barriers of different heights reduces the level of pollution behind the road by approximately 20-50%.
Constructing a Method for Assessing the Effectiveness of Using Protective Barriers Near Highways to Decrease the Level of Air Pollution
(ПП ТЕХНОЛОГІЧНИЙ ЦЕНТР, Харків, 2021) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Biliaieva, Viktoriia V.; Rusakova, Tetiana I.; Berlov, Oleksandr V.; Mala, Yuliia
ENG: Highways are an intensive source of environmental pollution. Atmospheric air is exposed to the fastest anthropogenic influence. Therefore, a particularly important task is to minimize the level of air pollution near the highway. An effective method for solving this problem is the use of protective barriers of various shapes installed near highways. At the stage of designing these protective structures, an important task arises to assess their effectiveness. Estimation of the effectiveness of protective barriers by the method of the physical experiment takes considerable time to set up and conduct an experiment, as well as analyze the results of hysical modeling. This method is not always convenient during design work. An alternative method is the method of mathematical modeling. For the designer, it is very important to have mathematical models that make it possible to quickly obtain a predictive result and take into consideration a set of important factors on which the effectiveness of the protective barrier depends. A method has been devised that makes it possible to assess the effectiveness of using protective barriers to reduce the level of air pollution near the highway. It was found that an increase in barrier height by 80 % leads to a 22 % decrease in the concentration of impurities behind the barrier. It was established that applying a barrier with a height of 1.5 m leads to a 26 % decrease in the concentration of impurities in buildings adjacent to the highway. A method has been devised to assess the effectiveness of using absorbent "TX Active" surfaces on the protective barrier located near the highway. This study's result revealed that the application of a barrier with one "TX Active" surface leads to a decrease in the concentration of NO behind the barrier by an average of 43 %. When using a barrier with two "TX Active" surfaces, a decrease in the NO concentration behind the barrier is 85 % on average.
Development of a Method for Assessing Air Dustiness in the Main Fairing of the Launch Vehicle
(PC Тесhnology Сеntеr, Kharkiv, Ukraine, 2022) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Rusakova, Tetiana I.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Semenenko, Pavlo; Kozachyna, Valeriia; Brazaluk, Iuliia; Klym, Viktoriia; Tatarko, Larysa H.
ENG: The object of this study is the process of thermostating the main fairing with a satellite at the stage of prelaunch preparation of the launch vehicle. When thermostating, it is necessary to predict the risk of dust contamination of the satellite surface. Currently, there are no normative methods for solving this problem. A numerical model has been proposed that makes it possible to quickly predict the dynamics of pollution of any surface of the satellite. A numerical model has been built for analyzing the zones of dust pollution of air in the main fairing of the launch vehicle during thermostating. The novelty of the model is the use of the Laplace equation for the speed potential, based on which the problem of aerodynamics is solved, namely, the flow rate in the main fairing is determined. Based on the model built, a computational experiment was conducted for dust particles with a diameter of 6 μm that fall into the main fairing during thermostating. The results of the research showed that the formation of areas of dust pollution near the satellite is influenced by the geometric shape of the satellite, which affects the formation of an uneven air velocity field in the main fairing and the organization of air supply to the main fairing. Calculations are performed within a few seconds, which makes it possible during working day to conduct a set of studies into the rational choice of the organization of air exchange of the main fairing during its thermostating. The constructed numerical model can be used in design organizations to scientifically substantiate the thermostating mode of the main fairing, taking into consideration the characteristics of the satellite located in it.
Emergency Burning of Solid Rocket Propellant: Damage Risk Assessment to People in the Workplace
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, Dnipro, 2020) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kalashnikov, Ivan V.
EN: Purpose. This work includes the development of a computer model to calculate the risk of thermal damage to people in the shop in case of emergency burning of solid rocket propellant. Methodology. To calculate the temperature field in the shop in order to determine the zones of thermal damage to workers in the building, the equation expressing the law of energy conservation was used. Based on this modeling equation, the temperature field in the shop is calculated in the presence of a source of heat emission – burning solid rocket propellant. To calculate the velocity field of air flow in the shop, taking into account the location of obstacles in the path of heat wave propagation, we used the model of vortex-free air motion – the equation of the velocity potential. A two-step finite difference scheme of conditional approximation is used to numerically solve the equation for the velocity potential. A difference splitting scheme was used to numerically solve the energy equation. At the first stage of construction of the difference splitting scheme of the two-dimensional energy equation into the system of one-dimensional equations is performed. Each one-dimensional equation allows you to calculate the temperature change in one coordinate direction. The point-to-point computation scheme is used to determine the temperature. When conducting a computational experiment, the air exchange in the building is taken into account. The risk assessment of thermal damage to personnel in the building is performed for different probabilities of the place of emergency combustion of solid rocket propellant. Findings. Using numerical model prediction of the potential risk areas of thermal damage to staff in the shop for a variety of emergency situations was performed. Originality. A computer model for rapid assessment of the potential risk of damage to people in the shop in case of emergency burning of solid rocket propellant was constructed. Practical value. The authors developed a code that allows you to quickly simulate the temperature fields formation in the shop in case of emergency burning of solid rocket propellant and to identify potential areas of thermal damages to workers based on this information. The developed computer program can be used to assess the risk of thermal damage in the chemical industry in case of emergency.
Mathematical Modeling of Aeroion Mode in a Car
(The Silesian University of Technology, Katowice, Poland, 2022) Biliaiev, Mykola M.; Pshinko, Oleksandr M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Sładkowski, Aleksander
ENG: Summary. In this study, a mathematical method is proposed for calculating the concentration field of air ions of different polarities and dust levels in the passenger compartment, taking into account the geometry of the passenger compartment and seats, shelves, and other internal elements of the passenger compartment. The method also takes into account changes in the rate of the air flow ventilation, the location and number of ionizers, and sources of positive ions and dust, taking into account their different intensities and locations. On the basis of a numerical model for this method, software has been developed that allows users to carry out computational experiments without requiring much time for calculation. Based on the results, the optimal location of the ionizer in the passenger compartment of the car was determined to ensure comfortable conditions for the stay of passengers, which favorably affects their health. It has been found that the presence of two ionizers is optimal for creating comfort in the car with an ionization intensity of ions/s located at the top of the car. If there is one ionizer located on the dashboard or at the top of the car with a higher ionization rate than ions/s, it is not possible to simultaneously provide optimal ionization parameters for passengers in the front and rear seats of the car.
Mathematical Modeling of Shock Wave Interaction with Wagon
(IOP Publishing, 2020) Khrutch, V. K.; Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Kirichenko, Pavlo S.; Biliaieva, Viktoriia V.
EN: In case of some accidents on railways there may be situations when the shock wave appears and interacts with different objects on the railway (wagons, cargo, buildings etc.). In these cases it is necessary to predict the possible effect of shock wave diffraction on the different objects. Study of these problems on the basis of physical experiments (laboratory experiment or field experiment) demand expensive and unique experimental facility. In some cases physical experiment can’t be set. That is why mathematical simulation plays the important role in solving problem connected with shock wave propagation. For practice it is necessary to have predictive quick computing mathematical models which allow to perform numerical experiment on the basis of non-powerful computers. Now, in Ukraine, there is a real deficit of mathematical models which allow to compute quickly shock wave interaction with different objects. The aim of this work was development of quick computing numerical model to simulate shock wave propagation and its interaction with the wagons. The model is based on the numerical integration of Euler equations which are written in integral form. To solve modeling equations difference scheme of splitting was used. Results of numerical modeling are presented.
Modeling Coal Dust Dispersion from Pile with Protection Barriers
(EDP Sciences, 2020) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Kirichenko, Pavlo S.; Oladipo, Mutiu Olatoye; Poltoratskа, Viktoriia
EN: Abstract. The results of laboratory studies to evaluate the effectiveness of barriers which are used to reduce dust pollution from the coal pile are presented. The use of the Г-shaped barrier, which is set differently near the coal pile model, has been studied. A numerical model is proposed to compute coal dust concentration in the air near the pile. The Navier–Stokes equations are used to model the wind flow over the coal pile. These equations are written in the variables "vorticity-stream function". To simulate the process of coal dust dispersion from the coal pile, the equation of convective-diffusion transfer of the passive impurity is used. For numerical integration of the modeling equations, difference schemes of splitting are used. Developed numerical model allows to perform numerical experiments taking into account the complex geometric shape of the pile and screens. The results of the computational experiments are presented.
Modeling of Noise Pollution Near Railway
(European Scientific Institute, ESI, 2020) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.
EN: Noise from railway transport is a relevant problem from the point of view of people health. Now, in Ukraine, the railway traffic infrastructure has the period of development. It is important to predict railway transport noise impact in case of changing of transport infrastructure. Existing in Ukraine predictive models are based on empirical formulae which were obtained long ago for specific conditions and do not take into account some important factors. So, these models can’t be used for existing problems which are connected with railway transport noise. The aim of this work was development of numerical predictive model to forecast noise from railway transport. The model is built on the numerical integration of wave equation for acoustic pressure. Some results of numerical experiment are presented.
Modeling of the Atmosphere Pollution From Coal Trains
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Biliaieva, Viktoriia V.; Oladipo, Mutiu Olatoye; Chernyatyeva, Kateryna
EN: Abstract. Coal trains have an intensive impact on environment pollution. It is very important to predict adequately this impact during coal transportation. In Ukraine to predict atmosphere pollution from coal trains the regulatory model «OND-86» is used. This model does not take into account some important factors and coal train movement. We present numerical models to solve two problems:1) prediction of atmosphere pollution in the case of moving coal train; 2) prediction of atmosphere pollution in the case of additional special boards installation on the coal wagon. To solve these problems equation of coal duct convective- diffusive dispersion (Lagrange model of admixture dispersion) and equation of potential flow were used. Governing equations were numerically integrated using implicit difference schemes. For coding difference equations we used FORTRAN language. We present results of numerical experiments and laboratory experiments which illustrate the efficiency of the special additional boards installation on the coal wagon. These boards have «internal wing» and «external wing». The obtained results illustrate that installation of additional boards allows to minimize the atmosphere pollution near transport corridor.
Numerical Model for Evaluation Efficiency of Coal Pile Wetting
(IOP Publishing Ltd, 2022) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Gunko, Olena Y.; Rusakova, Tetiana I.
ENG: Problem statement. Wetting the surface of coal piles is a common method of reducing dust emissions. The purpose of the article. The aim of the paper is development of numerical model to assess effectiveness of coal pile wetting to reduce air pollution. Methodology. A two-dimensional mass transfer equation was used to model the process of coal dust distribution from the pile. This equation takes into account the convective and diffusion transport of coal dust in the atmosphere. A potential flow model was used to model the wind flow over the coal pile. Finite-difference splitting schemes have been used for numerical integration of modeling equations. Scientific novelty. The developed mathematical model takes into account different emission rates of coal dust from different parts of the coal pile. The model takes into account the effect of water evaporation from the coal pile on the rate of intensity of coal dust emission. Practical significance. Computer code based on the proposed numerical model has been developed. The developed code can be used to predict the efficiency of wetting coal piles over time. Conclusion. Two-dimensional numerical model was developed to evaluate the efficiency of coal pile wetting which is used to reduce coal dust concentration near pile. The model is focused on evaluation of the level of air pollution in the working areas near the coal pile. Developed numerical model takes into account geometrical form of coal pile and non-uniform wind velocity pattern. This numerical model uses some empirical models to describe mathematically relation between the dust emission rate and moisture.
Numerical Model to Simulate Ventilation of Dead–End Mine Working with Brattice
(EDP Sciences, 2020) Voloshyn, Oleksii I.; Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Rusakova, Tetiana I.; Kalashnikov, Ivan V.
EN: Abstract. A computational model to simulate ventilation of a dead-end mine working with line brattice has been developed. To solve fluid dynamics problem, i.e. to compute flow pattern, model of inviscid flow has been used. That allows to compute quickly air flow pattern. To simulate dust dispersion in the dead-end mine working with brattice two- dimensional equation of mass transfer has been used. Numerical integration of Laplas equation for the velocity potential has been carried out using Samarski two steps difference scheme of splitting. Proposed CFD model allows quick computing of dust dispersion in the dead-end mine working with brattice. Markers (porosity technique) have been used to create the complex geometrical form of computational domain. Results of numerical experiments which had been performed on the basis of the developed CFD model have been presented.
Numerical Simulation of Toxic Chemical Transport after Accidental Release at Chemical Plant
(Editura Academiei Romane, 2020) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Kalashnikov, Ivan V.
EN: Abstract. Toxic chemical release may occur at different plants and impact directly on the people in the working areas. It is very important to predict atmosphere pollution and make risk assessment for accidental releases. CFD modeling is a powerful tool to solve these problems. This work is concerning on development of quick computing numerical model to predict air pollution in case of accidental solid propellant burning at the chemical plant. The model is based on transport equation for the products of propellant burning. Air flow on the industrial site is computed on the basis of potential flow model. To solve governing equations implicit finite difference schemes of splitting have been used. The results of numerical experiments are presented.
Predicting Dust Pollution in the Passenger Compartment
(Kaunas University of Technology, Kaunas, 2022) Biliaiev, Mykola M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Mashykhina, Polina B.; Rusakova, Kateryna
ENG: Fine dust particles, which are present in the air in large quantities, are dangerous to human health. They enter the body through the lungs, but move to almost all organs, causing a number of respiratory diseases, pneumonia and are carriers of the coronavirus. This research proposes a method for numerically calculating the process of dust pollution of the passenger compartment when fine dust enters the cabin through the ventilation system. To calculate the concentration field of dust in the cabin, the equation of convective-diffusion dust dispersion is used, which takes into account the intensity of dust entering the passenger compartment, the unevenness of the air flow velocity field in the passenger compartment, diffusion, and additional dust emission from the floor surface. To calculate the velocity field of the air flow in the car interior, a potential flow model is used, the modeling equation is the Laplace equation for the velocity potential. For the numerical integration of the convective-diffusion dispersion equation of fine dust in the cabin, implicit finite-difference splitting schemes are used. For the numerical solution of the equation for the aerodynamic velocity potential, the alternating-triangular method of A. Samarsky is used. The computer code has been developed that implements the method of numerical calculation. The results of computational experiments to assess the level of dust pollution in the passenger compartment are presented.
Quick Computing Numerical Model of Pollutant Dispersion in Urban Street Canyon
(Kaunas University of Technology, Kaunas, 2022) Biliaiev, Mykola M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Kirichenko, Pavlo S.
ENG: This research proposes a numerical model for the quick calculation of air pollution by emissions from cars in urban area such as "canyon". The Euler equations written in Helmholds variables were used to calculate the wind flow velocity field in street canyon. A special technique is used to calculate the vorticity in the corner points of buildings and barriers near the road. To calculate pollutant concentration field in the street canyon, which is formed from the traffic flow, the mass transfer equation was used, which took into account pollutant emission rate from cars, atmospheric diffusion, gravitational deposition, convective transfer. For numerical integration of modeling equations change-triangular finite-difference schemes were used The computer code realizing the developed numerical model was developed. The results of computational experiments to estimate the level of air pollution for different variants of the "canyon" scheme are presented.
Reducing of Coal Dust Release from Train Wagon with Barrier
(IOP Publishing, 2020) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Oladipo, Mutiu Olatoye; Kirichenko, Pavlo S.
EN: Intensive environment pollution takes place during coal transportation in open wagons. Emission of coal dust from the coal wagons cause contamination of atmosphere and territory adjacent to the railway track. Different ways to reduce coal dust emission from the wagon are used in the world. Unfortunately, in Ukraine, this problem is far from solution and there is no serious research work in this field. The aim of this work was laboratory study of coal dust emission from the wagon model which had different barriers installed on the wagon. Laboratory experiments were carried for coal wagon without barrier and for coal wagon which had barriers of two types. Barrier of the first type had downwind wing. Barrier of the second type had upwind wing. The contamination zones, concentration near the model were studied. The obtained results illustrate that installation of barriers influence intensity of transport corridor contamination. Also a numerical model was developed to estimate wind flow and coal dust dispersion from the coal wagon. Equation of potential flow and equation of coal dust dispersion were used. Implicit difference schemes of splitting were used for numerical simulation of governing equations. Results of numerical experiment, which were performed, are presented.
Risk Assessment in Case of Toxic Chemical Emission at Railway Transport
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaieva, Viktoriia V.; Mashykhina, Polina B.; Kalashnikov, Ivan V.; Berlov, Oleksandr V.; Kravets, Ivan B.
EN: Abstract. Risk assessment during emission of toxic chemicals at railway transport is the problem of great scientific interest. To make such assessment we need special computer models. At present, in Ukraine,we have lack of such models. The authors present numerical models for territorial risk assessment in case of organized emissionsat railway transport (for example, emissions during locomotive movement) and in case of accident emissions (accident spills of dangerous cargo, emissions of NH3 from railway tank, etc.).The basis of the developed numerical models is the system of fundamental equations of fluid dynamics.These equations are solved numerically using implicit schemes of splitting. The developed models allow to take into account some important factors which influence the territorial risk value: probability of atmosphere conditions, train route, transport infrastructure at railway stations, probability of emission site.Also the process of pollutant chemical transformation in the atmosphere is taken into account in the developed models. The developed models allow to predict territorial risk in case of moving source of emission (moving damaged railway tank).The results of numerical experiments are presented. These results illustrate territorial risk maps for different sites near Prydniprovska railway.
Road with Fan for Reducing Exposure to Traffic Emissions
(Kaunas University of Technology, Kaunas, Lithuania, 2021) Biliaiev, Mykola M.; Rusakova, Tetiana I.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Oladipo, Mutiu Olatoye
ENG:Problem statement. Emissions from cars on highways significantly affect the quality of the air. Therefore, there are two important tasks within this problem. The first task is to predict the level of air pollution near the highway. The second problem is to minimize the level of air pollution near the highway. The effective and quick method to assess a specific means effectiveness to protect air from pollution near highways is mathematical modeling. The purpose of the article. The aim of the paper is development of a numerical model to calculate pollution zones near the road, where axial exhaust fans are locally installed at the height of protective barriers, which ensure the intake of emissions from vehicles. Methodology. The basis of the mathematical model is the equation of convective-diffusion transfer of impurities, which takes into account the intensity of emissions from cars, the unevenness of the air flow, atmospheric diffusion. The calculation of the wind flow velocity field in the presence of cars, an axial fan and a protective screen on the road is carried out on the model of a vortex-free flow of an ideal fluid. For the numerical integration of the mass transfer equation, implicit difference splitting schemes are used. For the numerical solution of the aerodynamic equation, a conditional approximation difference scheme is used. Scientific novelty. Based on the numerical model, the code was created, which was used to solve the problem of assessing the level of pollution near the road in the presence of emission source (vehicles), with the location of screens and axial fan. Practical significance. The results of computational experiments to assess the effectiveness of axial fans to reduce the level of gas pollution near highways are presented. Scenarios considered: axial fan and protective barrier; additional screen on the barrier; axial fan and two protective barriers. Conclusion. A numerical model has been developed to determine the effectiveness of reducing air pollution using protective barriers on which an axial fan is installed. The model is based on the mass transfer equation and the equation for the velocity potential. A feature of the model is the possibility to take into account the complex geometric shape of the barrier.
Simulation of Ground Waters Pollution Near Pools with Mine Wastewaters
(Національний гірничий університет, Дніпро, 2018) Biliaieva, Viktoriia V.; Mashykhina, Polina B.; Yakubovska, Zinaida M.
EN: The results of the study, dedicated to the process of ground waters pollution near pools. The purpose of the study is development of numerical model to compute quickly ground waters pollution near pools with mine waste waters. The method of the research is CFD simulation. Findings. New numerical model is proposed to compute the process ground waters pollution near pools. The originality. New model was developed for 2D computing of ground waters pollution. Practical implications. Developed model allows quick computing of ground waters pollution near pools with waste waters.
Watering of Cargo for Reducing Dust Emissions from Coal Wagon
(Kaunas University of Technology, Kaunas, Lithuania, 2021) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Mashykhina, Polina B.; Tyshchenko, Serhii S.
ENG: Open topped coal wagons are widely used in different countries. The coal surface exposed to air emits intensively fugitive dust. Water application is used for reducing fugitive dust emissions from open topped coal trains. The objective of this research was to develop numerical model to study efficacy of water application on the surface of coal. To simulate air flow over coal wagon Euler equations were used. These equations were written in Helmholtz variables “vorticity–flow function”. Finite difference schemes of splitting were used for numerical integration of Euler equations. To simulate coal dust dispersion from coal wagon mass transfer equation was used. This equation took into account air flow speed, turbulent diffusion, dust emission rate from cargo surface. To solve mass transfer equation change-triangle implicit difference scheme of splitting was used. To simulate water evaporation from cargo and dust emission rate dependence from moisture, empirical models were used. On the basis of developed numerical model computer code was developed using FORTRAN. Results of numerical experiments are presented.