Наука та прогрес транспорту.

Permanent URI for this communityhttp://crust.ust.edu.ua/handle/123456789/1665

У даному репозитарії представлені електронні версії статей, автори яких є членами співтовариства університету.
Повний випуск кожного видання доступний http://stp.ust.edu.ua/
до 2013 року виходив під назвою "Вісник Дніпропетровського національного університету залізничного транспорту імені академіка В. Лазаряна"

Science and Transport Progress.
This repository contains e-articles whose authors are members of the community of the university.
Full version http://stp.ust.edu.ua/
until 2013 appeared under the title "Bulletin of Dnepropetrovsk National University of Railway Transport named after Academician V. Lazaryan"

Browse

Now showing 1 - 10 of 10

Anti-Terror Engineering in the Case of Possible Terrorist Attacks with Chemical Agents
(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2018) Biliaev, Nikolai N.; Berlov, Oleksandr V.; Kalashnikov, Ivan V.; Kozachyna, Vitalii A.
ENG: Purpose. This work aims to develop a method of local outdoor reduction of the concentration of a chemically hazardous substance, which entered the atmosphere through a cafe roof vent. It also involves the creation of a numerical model for calculating the chemical contamination zone that allows assessing the effectiveness of the screens used to minimize its level. Methodology. To solve this problem, we used the velocity potential equation that al-lowed to determine the air flow velocity field, and the equation of convective diffusion dispersion of a chemically hazardous agent in the atmospheric air emitted through the ventilation system in case of a terrorist attack. The simulation took into account the uneven velocity field of the wind flow, atmospheric diffusion, emission rate of a chemically hazardous agent. In the numerical integration of the velocity potential equation, we used the Liebmann method. For the numerical solution of the equation of convective diffusion dispersion of the impurity, an implicit alternate-triangular difference splitting scheme was used. Findings. The developed numerical model allowed assessing the effectiveness of building screens used to reduce the concentration of a hazardous substance and minimize the risk of toxic damage to people outdoor during an initiated emission of a chemical agent. The constructed numerical model can be implemented on computers of low and medium power, which allows it to be widely used for solving problems of the class under consideration when developing an anti-terror engineering strategy. Originality. An effective numerical model for calculating the outdoor chemical contamination zone during a possible terrorist attack using a chemical (biological) agent has been proposed. The model can also be applied to assess the effectiveness of some protective measures aimed at reducing the air pollution level during a terrorist attack. Practical value. The developed numerical model can be used to organize protective actions near social objects of a possible chemical attack by a terrorist.
Atmosphere Protection in Case of Emergency During Transportation of Dangerous Cargo
(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2016) Berlov, Oleksandr V.
EN: Purpose. The paper highlights the development of numerical models for prediction of atmospheric pollution in case of burning of the solid rocket propellant in a railway car, situated near the building on railway territory. These models can be used in predicting the effectiveness of neutralization upon the atmosphere protection for this type of accidents. Methodology. To solve this problem the numerical models based on the use of Navier-Stokes equations, to determine the velocity field of the wind flow near cars and buildings, and contaminants-transfer equations in the atmosphere were developed. For the numerical integration of pollutant transport equation was used implicit «change – triangle» difference scheme. When constructing a difference scheme physical and geometric cleavage of the transfer equation is carried out in four steps. Unknown value of pollutant concentration at each step of cleavage is determined by the explicit scheme – the method of «point-to-point computation». For the numerical integration of the Navier-Stokes equations are used implicit difference schemes. When carrying out computing experiment also takes into account: the velocity profile of wind flow; interaction between the building and the wind flow and flame jet of solid rocket propellant; the presence of a railroad car; inside which there is a source of pollution; instability of pollutant emissions. On the basis of constructed numerical models was performed the computer experiment for assessing the level of air pollution at dangerous cargo rail transportation in case of emergency at railway territory.The application calculations for the timely combustion products neutralization of solid rocket propellant were carried out. Findings. The numerical models that let promptly calculate air contamination in case of emergency during solid rocket propellant transportation, as well as calculate the rational parameters of pollutant neutralization process were developed by the researcher. These models can be used for routine calculations of various accident scenarios simulation. Originality. Numerical models were developed; they take into account significant factors, influencing the pollutant dispersion process in the atmosphere. On their base a pollutant neutralization method was offered in emergency situations on the railway transport. Practical value. Efficient numerical models, so called «diagnostic models» were considered for the rapid calculation of the air pollution level and air protection technology in emergency situations, in particular, in the case of railway transportation the solid rocket propellant.
Calculation of «Vulnerability» Zone in Case of Terrorist Attack with Chemical Agents
(Дніпропетровський національний університет залізничного транспорту ім. акад. В. Лазаряна, Дніпро, 2018) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Kalashnikov, Ivan V.; Kozachyna, Vitalii A.
EN: Purpose. The work involves the development of a numerical model for calculating the «vulnerability» zone of a possible terrorist attack objective with the use of a chemical agent in a builtup environment. The «vulnerability» zone is a territory near the attack objective, where the emission of a chemical agent during the attack will lead to undesirable consequences. The emission of a chemical agent outside the «vulnerability» zone will not create a dangerous concentration near the attack objective. Methodology. To solve this problem, we use the equation for the velocity potential, on the basis of which we determine the wind stream velocity field, and the equation adjoint to the equation of mass transfer in the atmospheric air of the chemical agent emitted in the event of a terrorist attack. During simulation, we take into account the uneven wind stream velocity field, atmospheric diffusion and the rate of emission of a chemically hazardous substance. For the numerical integration of the velocity potential equation, we use the method of A. A. Samarsky. For numerical solution of the adjoint equation, we introduce new variables and use an implicit difference splitting scheme. The peculiarity of the developed numerical model is the possibility of operative estimation of the «vulnerability» zone near a possible attack objective. Findings. The developed numerical model and computer program can be used for scientifically grounded assessment of the «vulnerability» zone near significant facilities in the event of possible attacks with the use of chemical (biological) agents. The constructed numerical model can be implemented on computers of small and medium power, which allows it to be widely used to solve the problems of this class when developing the emergency response plan. The results of the computational experiment are presented, which allow us to evaluate the possibilities of the proposed numerical model. Originality. An effective numerical model is proposed for calculating the «vulnerability» zone near the facility, which may be the target of a terrorist attack with the use of a chemical agent. The model is based on the numerical integration of the velocity potential equation and the equation adjoint to the equation of mass transfer of a chemically dangerous substance in the atmosphere. Practical value. The developed model can be used to organize protective actions near the target facility of a possible chemical attack by terrorists.
Computer Modeling of Air Pollution in Case of Dust Cloud Movement in Open Pit Mine
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaieva, Viktoriia V.; Kirichenko, Pavlo S.; Berlov, Oleksandr V.; Gabrіnets, Volodymyr O.; Horiachkin, Vadym M.
ENG: Purpose. Explosions in open pits lead to the formation of dust clouds. These clouds lead to intense air pollution. An important task is the development of methods for predicting the dynamics of atmospheric air pollution during ex-plosions in open pits. The purpose of this work is development of a numerical model to predict atmosphere pollution after explosion in open mine pit. The task is to develop a numerical model that would allow for the calculation to take into account the geometrical shape of the open pit mine, the parameters of the meteorological situation (wind speed, atmosphere), the shape of the dust cloud that is formed in the open pit mine at the site of the explosion. Methodology. Mathematical modeling of dust cloud dispersion during an explosion in an open pit mine is based on the use of fundamental equations of aerodynamics and mass transfer. The airflow velocity field in the open pit mine is modeled using the Laplace equation for the velocity potential. The formation of the concentration field of dust is mod-eled on the basis of the equation of convective-diffusion dispersion of an impurity. For numerical integration of model-ing equations, difference schemes are used. The Laplace equation for the velocity potential is numerically integrated using the Richardson method. For the numerical integration of the convective-diffusion dispersion equation for an im-purity, an implicit difference splitting scheme is used. Findings. A CFD model has been developed that allows you to calculate the formation of pollution zones during the movement of a dust cloud in the open pit mine. A feature of the developed model is the speed of calculation. For practical use of the developed model, standard input information is required. Originality. In contrast to the existing models in Ukraine, the developed numerical model allows taking into account the geometrical shape of the open pit mine and the geometrical shape of the dust cloud when making predictive calculations to assess the level of air pollution caused by explosions in open pits. Practical value. The developed nu-merical model can be implemented on computers of low and medium power. For practical use of the numerical model, standard information on meteorological conditions in open pit mine is required. The numerical model can be used for environmental assessment of the effect of explosions in open pit mine on environmental pollution and work areas.
Emergency Burning of Solid Rocket Propellant: Damage Risk Assessment to People in the Workplace
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, Dnipro, 2020) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Kalashnikov, Ivan V.
EN: Purpose. This work includes the development of a computer model to calculate the risk of thermal damage to people in the shop in case of emergency burning of solid rocket propellant. Methodology. To calculate the temperature field in the shop in order to determine the zones of thermal damage to workers in the building, the equation expressing the law of energy conservation was used. Based on this modeling equation, the temperature field in the shop is calculated in the presence of a source of heat emission – burning solid rocket propellant. To calculate the velocity field of air flow in the shop, taking into account the location of obstacles in the path of heat wave propagation, we used the model of vortex-free air motion – the equation of the velocity potential. A two-step finite difference scheme of conditional approximation is used to numerically solve the equation for the velocity potential. A difference splitting scheme was used to numerically solve the energy equation. At the first stage of construction of the difference splitting scheme of the two-dimensional energy equation into the system of one-dimensional equations is performed. Each one-dimensional equation allows you to calculate the temperature change in one coordinate direction. The point-to-point computation scheme is used to determine the temperature. When conducting a computational experiment, the air exchange in the building is taken into account. The risk assessment of thermal damage to personnel in the building is performed for different probabilities of the place of emergency combustion of solid rocket propellant. Findings. Using numerical model prediction of the potential risk areas of thermal damage to staff in the shop for a variety of emergency situations was performed. Originality. A computer model for rapid assessment of the potential risk of damage to people in the shop in case of emergency burning of solid rocket propellant was constructed. Practical value. The authors developed a code that allows you to quickly simulate the temperature fields formation in the shop in case of emergency burning of solid rocket propellant and to identify potential areas of thermal damages to workers based on this information. The developed computer program can be used to assess the risk of thermal damage in the chemical industry in case of emergency.
Environment Pollution Modeling on the Base of Quick Computing Models
(Ukrainian State University of Science and Technologies, 2025) Rusakova, Tetiana I.; Berlov, Oleksandr V.; Gubin, O. I.; Gunko, Olena Yu.; Mashykhina, Polina B.
ENG: Purpose. Development of a fast calculation models for determining zones of ground waters and air chemical pollution during the emission of chemically hazardous substances from anthropogenic sources of pollution. To mod-el the process of passive impurity transfer in ground waters and in atmospheric air, the G. Marchuk model is used, which takes into account the speed and direction of the flow, the intensity of the emission of chemically hazardous substances, and atmospheric diffusion (dispersion in round waters). Methodology. The process of ground waters and air pollution modeling is based on the numerical integration of the mass transfer equation (G. Marchuk model). Two numerical models were built. One numerical model was built to simulate ground waters pollution. Another numerical model was built to simulate air pollution. The construction of a numerical models of the impurity propagation process was carried out by splitting of the mass transfer equation (G. Marchuk model). Then a variable-triangular finite-difference decomposition schemes were used for numerical integration. The unknown value of the concentration of a chemically hazardous substance is carried out using explicit formulas. A set of applied programs has been developed based on the constructed numerical models. Findings. A set of applied programs has been developed based on the constructed numerical models. The results of numerical calculations are presented, showing the efficiency of the proposed numerical models. Originality. Proposed numerical models of mass transfer allow to compute quickly the areas of chemical air pollution due to the emission of toxic substances from anthropogenic sources of pollution. Practical value. Based on the proposed numerical models, a computer code has been developed. The developed models and computer code make it possible to estimate the size and intensity of environmental pollution, and can be used in solving the problem of assessing the negative impact on the ground waters and air from different sources. The results of numerical calculations show the operability of the proposed models.
Modeling of Filtration and Geomigration Under Anthropogenic Impact on Groundwater
(Ukrainian State University of Science and Technologies, Dnipro, 2025) Medvedieva, Olha O.; Dziuba, Serhii V.; Tiutkin, Oleksii L.; Mashykhina, Polina B.; Berlov, Oleksandr V.
ENG: Purpose. One of the most widespread methods of liquid waste disposal is the use of settling ponds. Wastewater in such lagoons eventually infiltrates into the aeration zone and reaches groundwater. Thus, a chemical contamination area is formed both in the aeration zone and in groundwater. When reengineering sedimentation ponds (for example, when increasing the height of the dam), there is an increase in the pressure in the structure, which will affect the intensity of infiltration of wastewater from the pond into the aeration zone), it is necessary to determine the change in the intensity of environmental pollution in advance. To solve such a forecasting problem, it is necessary to use specialized mathematical models. The aim of the study is to develop numerical models for assessing the dynamics of aeration zone pollution during the infiltration of liquid waste from a sedimentation pond. Methodology. The Laplace equation for the head is used to solve the filtration problem. The process of mass transfer of impurities in the aeration zone is modeled using the mass transfer equation, which takes into account the convective-dispersive transfer of impurities. The numerical integration of the modeling equations is carried out using finite-difference schemes. Findings. Numerical models of filtration and mass transfer are considered, which allow to estimate the dynamics of changes in the contamination area in the aeration zone during the infiltration of liquid wastewater from a sedimentation pond. Originality. The construction of mathematical models for analyzing the infiltration of liquid wastewater from a sedimentation pond is considered. Numerical models take into account the convective-dispersion process of impurity propagation in the aeration area. Practical value. The considered numerical models can be used to assess the environmental impact of sedimentation ponds used for the accumulation of liquid waste.
Quick computing CFD model to predict chemical pollution in room
(Український державний університет науки і технологій, Дніпро, 2024) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Mashykhina, Polina B.
ENG: Purpose. The problem of accidental contamination of workspaces attracts special attention, since in the event of such extreme situations, intense chemical contamination of the air in work areas occurs. This poses a threat of toxic exposure to workers. When assessing the consequences of such situations, it is necessary to take into account the time factor, in particular, to quickly determine the creation of concentrations of chemically hazardous substances. In this regard, an urgent task is to develop effective mathematical models for rapid assessment of the consequences of extreme situations in the working areas of chemically hazardous facilities. The paper considers a CFD model for analyzing the process of chemical air pollution in a workspace during an accidental release of a chemically hazardous substance. The solution of the problem is based on the numerical integration of the fundamental equations of continuum mechanics. Methodology. To calculate the air velocity field in the working room during the operation of supply and exhaust ventilation, a mathematical model of the motion of an inviscid fluid was used. The equation of convective diffusion motion was used to calculate the concentration of a chemically hazardous substance in the workspace. The integration of the modeling equations was carried out using finite difference schemes. Findings. A dynamic model has been created to calculate the spread of a chemically hazardous substance in a work-space. On the basis of the built CFD model, a computer program was created to conduct a computational experiment. Originality. A CFD model has been created to predict the level of air pollution in a workspace in the event of toxic gas emissions. The model is based on the fundamental equations of aerodynamic mechanics and mass transfer. The model makes it possible to determine the effect of the ventilation mode, the intensity of emission of a chemically hazardous substance, the location of equipment in the workspace, and the dynamics of the formation of concentration fields. Practical value. The developed CFD model can be used to quickly analyze the consequences of accidental emissions of a chemically hazardous substance in a workplace and assess the risk of toxic exposure of workers.
Risk Assessment of Thermal Damage to People at Industrial Sites in Case of Emergency Burning Solid Propellant
(Дніпровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2020) Biliaiev, Mykola M.; Berlov, Oleksandr V.; Kozachyna, Vitalii A.; Kalashnikov, Ivan V.; Shevchenko, O. V.
EN: Purpose. This work involves the development of a numerical model for the calculation of areas of thermal damage to people in the event of solid propellant burning at the industrial site. Methodology. An equation expressing the law of energy conservation was used to solve the problem of determining the areas of thermal shock of people at the industrial site. A potential flow model was used to calculate the airflow velocity field in the presence of buildings at the industrial site where an emergency occurs. The numerical solution of the two-dimensional equation for the velocity potential is derived using the Liebmann method. This numerical model takes into account the uneven velocity field of the wind flow that is formed near industrial buildings. An implicit difference splitting scheme was used to numerically solve the energy equation. The physical splitting of a two-dimensional energy equation into a system of one-dimensional equations describing the temperature transfer in one coordinate direction has been carried out previously. At each splitting step, the unknown temperature value is determined by an explicit point-to-point computation scheme. Based on the numerical model built, the code using the FORTRAN algorithm language is created. Findings. Based on the developed numerical model, a computational experiment was conducted to evaluate the risk of thermal damage to people at the industrial site where solid propellants are produced. The dangerous areas for personnel are identified. Originality. An efficient numerical model has been developed to calculate the zones of thermal pollution in case of solid propellant burning. Practical value. Based on the developed mathematical model, a computer program was created, which allows performing serial calculations for determining the zones of thermal damage during emergencies at the chemically hazardous objects. The mathematical model developed can be used to design an emergency response plan for chemically hazardous objects.
Risk Assessment With the Use of the Monte-Carlo Method
(Дніпровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2019) Amelina, Larysa V.; Biliaiev, Mykola M.; Berlov, Oleksandr V.; Cherednychenko, L. A.
EN: Purpose. This work involves the development of a numerical model for the calculation of chemical contamination zones in the event of ammonia accident at the pumping station, as well as a model for assessing the risk of damage and wound depth in the body in case of fragments scattering formed during the pipeline explosion at the pumping station. Methodology. To solve this problem, we used the mass transfer equation for the ammonia propagation in the air. A potential flow model is used to calculate the air flow velocity field in the presence of buildings at the ammonia pumping station. The numerical solution of the three-dimensional equation for the velocity potential is derived by the cumulative approximation method. When using this numerical model, the irregular field of wind flow velocity, the change in vertical atmospheric diffusion coefficient with altitude, the ammonia emission intensity, the emission point of the chemical substance were taken into account. A differential splitting scheme was used to numerically solve the ammonia transfer equation in the air. Physical splitting of the three-dimensional mass transfer equation to a system of equations describing the contaminant transfer in one coordinate direction is carried out beforehand. At each step of splitting, the unknown value of ammonia concentration is determined by an explicit scheme of point-to-point computation. A mathematical model for calculating the fragments scattering in case of emergency at the pumping station is considered. Findings. On the basis of the developed numerical model, a computational experiment was conducted to estimate the level of air pollution at the ammonia pumping station. The area of possible damage of people during the fragment scattering during the explosion at the ammonia pumping station was determined. Originality. A numerical model has been developed that allows calculating the chemical contamination zones in case of emergency ammonia emission at the pumping station. The model is complemented by assessment of impact zones in case of fragment scattering during the pumping station explosion. Practical value. Based on the developed mathematical model, a computer program was created, which allows performing serial calculations for determining the impact zones during emergency situations at the chemically hazardous objects. The mathematical model developed can be used to perform serial calculations during the development of emergency response plan for chemically hazardous objects.