Кафедра енергетичних систем та енергоменеджменту (ДМетІ)

Permanent URI for this communityhttp://crust.ust.edu.ua/handle/123456789/14599

UK: Кафедра енергетичних систем та енергоменеджменту (Дніпровський металургійний інститут) EN: Department of Energy Systems and Energy Management (DMetI)

Browse

Now showing 1 - 2 of 2

Application of Biomass Pellets for Iron Ore Sintering
(Trans Tech Publications Ltd, Switzerland, 2021) Kieush, Lina; Koveria, Andrii; Qiao Zhu, Zuo; Boyko, Maksym M.; Sova, Artem; Yefimenko, Vadym
ENG: Purpose. The use of biomass as fuel might solve several technological and environmental issues and overcome certain challenges of sinter production. In particular, as revealed by comprehensive analyses, biomass can be used as fuel for iron ore sintering. In this study, we investigate the use of some raw and pyrolysis-processed biomass pellet types, namely wood, sunflower husks (SFH), and straw, for iron ore sintering. In the experiments, the pyrolysis temperature was set to 673, 873, 1073, and 1273 K, and the proportion of biomass in the fuel composition was set to 25%. It was established that the addition of biofuels to the sintering blend leads to an increase in the gas permeability of the sintered layer. The analysis of the complex characteristics of the sintering process and the sinter strength showed the high potential of wood and sunflower husk pellets pyrolyzed at 1073 and 873 K, respectively, for iron ore sintering. The analysis of the macrostructure of the sinter samples obtained using biomaterials revealed that with higher pyrolysis temperatures; the materials tend to have greater sizes and higher amounts of pores and cracks. The composition analyses of the resultant sinters revealed that with higher temperature, the FeO content of the sinters tends to increase.
Metallurgical Coke Production with Biomass Additives: Study of Biocoke Properties for Blast Furnace and Submerged
(MDPI, Switzerland, 2022) Bazaluk, Oleg; Kieush, Lina; Koveria, Andrii; Schenk, Johannes; Pfeiffer, Andreas; Zheng, Heng; Lozynskyi, Vasyl
ENG: Biocoke has the potential to reduce the fossil-based materials in metallurgical processes, along with mitigating anthropogenic CO2- and greenhouse gas (GHG) emissions. Reducing those emissions is possible by using bio-based carbon, which is CO2-neutral, as a partial replacement of fossil carbon. In this paper, the effect of adding 5, 10, 15, 30, and 45 wt.% biomass pellets on the reactivity, the physicomechanical, and electrical properties of biocoke was established to assess the possibility of using it as a fuel and reducing agent for a blast furnace (BF) or as a carbon source in a submerged arc furnace (SAF). Biocoke was obtained under laboratory conditions at final coking temperatures of 950 or 1100 °C. Research results indicate that for BF purposes, 5 wt.% biomass additives are the maximum as the reactivity increases and the strength after reaction with CO2 decreases. On the other hand, biocoke’s physicomechanical and electrical properties, obtained at a carbonization temperature of 950 °C, can be considered a promising option for the SAF.