Дослідження впливу термодеформаційного оброблення на структуру й властивості білих чавунів
| dc.contributor.author | Миронова, Тетяна Михайлівна | uk_UA |
| dc.date.accessioned | 2026-03-19T09:53:10Z | |
| dc.date.issued | 2025 | |
| dc.description | Т. Миронова: ORCID 0000-0003-0105-5479 | uk_UA |
| dc.description.abstract | UKR: Одним з основних завдань цієї роботи є вивчення можливості подрібнення евтектичного цементиту за допомогою багаторазового пластичного деформування й термічного оброблення. Встановлено, що на пластичність чавунів, легованих ванадієм, сприятливо впливає взаємодія процесів карбідного перетворення в цементиті та його динамічна рекристалізація. За повторного деформування після проміжного відпалювання в інтервалі температур, де ці процеси протікають, спостерігається підвищення пластичності в 1,5…2 рази. Формування зернистої структури в цементиті внаслідок статичної рекристалізації сприяє його дробленню під час подальшого оброблення тиском за температури, нижчій за Т початку рекристалізації. | uk_UA |
| dc.description.abstract | ENG: Problem in the structure of experimental white cast iron, the eutectic component is ledeburite based on iron carbide. The large quantity of eutectic carbides on the one hand determines the high hard- ness of the cast iron, but on the other hand, their size and location determine brittleness and fracture under impact loads. Goal. One of the main tasks of this work is the grinding of eutectic cementite using plastic deformation and heat treatment. Results and originality. At temperatures above 1000 °C, carbide transformation occurs in eutectic cementite doped with vanadium: (Fe,V)3 partially decomposes into VC and austenite. Carbide transformation enhances deformation hardening during plastic deformation. After the first stage of deformation during the annealing process, recrystallization occurs in the cementite, new boundaries are formed, on which additional vanadium carbides are formed. After rolling, the cast iron was subjected to 5-hour annealing at pre-recrystallization temperatures of 750 °C, 850 °C and above the temperature of the onset of recrystallization. After annealing, the samples were deformed again. Re-deformation was carried out at temperatures up to and above the temperature of the beginning of cementite recrystallization: at 900°С, 950°С, 1000 ... 1020 and 1050°С. Combined heat and de- formation treatment of vanadium-alloyed white cast iron, which includes preliminary annealing in the temperature range of carbide transformation of eutectic cementite and multiple hot deformation with intermediate annealing, significantly increases the ductility of cast iron and the ability to deform with degrees of up to 70...80%. The formation of new boundaries in cementite during static recrystallization contributes to its crushing as a result of subsequent pressure treatment at a temperature below the temperature of the beginning of recrystallization, below 1000°C. Practical value A thermal deformation treatment regime has been developed that con- tributes to the crushing of carbide inclusions and increased wear resistance of cast iron parts. | en |
| dc.identifier.citation | Миронова Т. М. Дослідження впливу термодеформаційного оброблення на структуру й властивості білих чавунів. Вісник Харківського національного автомобільно-дорожнього університету). 2025. № 111. C. 89–94. DOI: https://doi.org/10.30977/BUL.2219-5548.2025.111.0.89. | uk_UA |
| dc.identifier.doi | https://doi.org/10.30977/BUL.2219-5548.2025.111.0.89 | en |
| dc.identifier.issn | 2219-5548 (Print) | |
| dc.identifier.issn | 2521-1773 (Online) | |
| dc.identifier.uri | http://bulletin.khadi.kharkov.ua/article/view/349016 | en |
| dc.identifier.uri | https://crust.ust.edu.ua/handle/123456789/21881 | en |
| dc.language.iso | uk | |
| dc.publisher | ХНАДУ, Харків | uk_UA |
| dc.subject | білий чавун | uk_UA |
| dc.subject | відпалювання | uk_UA |
| dc.subject | гаряче деформування | uk_UA |
| dc.subject | карбідне перетворення | uk_UA |
| dc.subject | рекристалізація | uk_UA |
| dc.subject | пластичність | uk_UA |
| dc.subject | прокатування | uk_UA |
| dc.subject | кування | uk_UA |
| dc.subject | white cast iron | en |
| dc.subject | annealing | en |
| dc.subject | hot deformation | en |
| dc.subject | мicrostructure | en |
| dc.subject | carbide transformation | en |
| dc.subject | recrystallization | en |
| dc.subject | plasticity | en |
| dc.subject | rolling | en |
| dc.subject | forging | en |
| dc.subject | КМТОМ | uk_UA |
| dc.subject.classification | TECHNOLOGY | en |
| dc.subject.classification | TECHNOLOGY::Materials science | en |
| dc.title | Дослідження впливу термодеформаційного оброблення на структуру й властивості білих чавунів | uk_UA |
| dc.title.alternative | Research on the Influence of Thermal Deformation Treatment on the Structure and Properties of White Cast Iron | en |
| dc.type | Article | en |