Вплив стеаринової кислоти на властивості деревинно-полімерних композитів
| dc.contributor.author | Криволапов, Дмитро Сергійович | uk_UA |
| dc.contributor.author | Сухий, Костянтин Михайлович | uk_UA |
| dc.contributor.author | Баштаник, П. І. | uk_UA |
| dc.contributor.author | Третьяков, А. О. | uk_UA |
| dc.contributor.author | Безрукавий, В. О. | uk_UA |
| dc.date.accessioned | 2024-12-18T09:58:57Z | |
| dc.date.available | 2024-12-18T09:58:57Z | |
| dc.date.issued | 2023 | |
| dc.description | К. Сухий: ORCID 0000-0002-4585-8268 | uk_UA |
| dc.description.abstract | UKR: Досліджено вплив стеаринової кислоти на технологічні, фізико-механічні та експлуатаційні властивості композитів на основі вторинного поліетилену низького тиску, наповненого деревинним борошном. Показано, що введення до деревинно-полімерного композиту до 1,1 мас. % стеаринової кислоти покращує технологічні параметри екструзії: зменшується крутний момент головного приводу екструзійного обладнання і збільшується продуктивність. При вмісті стеаринової кислоти в композиті 0,8-1,25 мас. % спостерігається зростання фізико-механічних показників композиту: збільшується міцність при вигині на 20 % (до 51,3 МПа) та ударна в'язкість за Шарпі на зразках з надрізом на 37 % (до 11,9 кДж/м2), а також зменшуються коефіцієнт лінійного термічного розширення та водопоглинання. | uk_UA |
| dc.description.abstract | ENG: We studied the influence of stearic acid on the technological, physical-mechanical and operational properties of composites based on secondary low-pressure polyethylene filled with wood flour. It was shown that the introduction of more than 1.1 wt.% of stearic acid into the wood-polymer composite improves the technological parameters of extrusion: the torque of the main drive of the extrusion equipment decreases and productivity increases. When the concentration of stearic acid in the composite is 0.8–1.25 wt.%, there is an improvement in the physical and mechanical parameters of the composite: the bending strength increases by 20% (up to 51.3 MPa) and the Charpy impact toughness of the samples with a cut increases by 37% (up to 11.9 kJ/m2), while the coefficient of linear thermal expansion and water absorption decrease. | en |
| dc.description.sponsorship | ДВНЗ “Український державний хіміко-технологічний університет”, Дніпро; ТОВ «НВП Сервіс Комплект», Дніпро | uk_UA |
| dc.identifier.citation | Криволапов Д. С., Сухий К. М., Баштаник П. І., Третьяков А. О., Безрукавий В. О. Вплив стеаринової кислоти на властивості деревинно-полімерних композитів. Питання хімії та хімічної технології. 2023. № 5. С. 50–54. DOI: http://dx.doi.org/10.32434/0321-4095-2023-150-5-50-54. | uk_UA |
| dc.identifier.doi | http://dx.doi.org/10.32434/0321-4095-2023-150-5-50-54 | en |
| dc.identifier.issn | 0321-4095 (Print) | |
| dc.identifier.issn | 2413-7987 (Online) | |
| dc.identifier.uri | http://www.vhht.dp.ua/uk/arhiv-2023-5/ | en |
| dc.identifier.uri | https://crust.ust.edu.ua/handle/123456789/19323 | en |
| dc.language.iso | uk | |
| dc.publisher | ДВНЗ “Український державний хіміко-технологічний університет”, Дніпро | uk_UA |
| dc.subject | деревинно-полімерний композит | uk_UA |
| dc.subject | параметри екструзії | uk_UA |
| dc.subject | поліетилен низького тиску | uk_UA |
| dc.subject | стеаринова кислота | uk_UA |
| dc.subject | фізико-механічні властивості | uk_UA |
| dc.subject | wood-polymer composite | en |
| dc.subject | extrusion parameters | en |
| dc.subject | low-pressure polyethylene | en |
| dc.subject | stearic acid | en |
| dc.subject | physical and mechanical properties | en |
| dc.subject.classification | TECHNOLOGY::Materials science | en |
| dc.title | Вплив стеаринової кислоти на властивості деревинно-полімерних композитів | uk_UA |
| dc.title.alternative | Influence of Stearic Acid on the Properties of Wood-Polymer Composites | en |
| dc.type | Article | en |