2nd International Scientific and Practical Conference “Energy-Optimal Technologies, Logistic and Safety on Transport” (EOT-2019)

Permanent URI for this collectionhttp://crust.ust.edu.ua/handle/123456789/11582

Took plase 21 october 2019

Browse

Now showing 1 - 40 of 43

The Concept of a Hybrid Traction Power Supply System
(Les Ulis: EDP Sciences-Web of Conferences, France, 2019) Sychenko, Viktor G.; Kuznetsov, Valeriy; Kosariev, Yevhen; Bekh, Petro V.; Sayenko, Yuriy; Styslo, Bohdan O.; Pavlichenko, Mihail; Vasilev, Ihor; Pulin, Mykola M.
ENG: Abstract. The growing shortage of energy resources to provide heavy traffic and high-speed traffic necessitates the development of a new power supply scheme for a traction network using sources of distributed generation of electric energy. Application of asymmetric distributed traction power system with the use of distributed generation allows to increase electric energy efficiency of the feed system of rolling stock, reduce its material capacity and increase the reliability of the functioning of the railway system as a whole. The proposed structure of the hybrid electric traction system involves the creation of a new paradigm aimed at ensuring high demands on the voltage and specific power in the traction network, which will allow to improve the quality and safety of the transportation process when increasing the energy performance indicators. This paradigm will allow to form a new philosophy of building traction power systems. The key elements of this philosophy are decentralization of generation and consumption of electric energy, the use of intelligent electric equipment, distributed power supply management in a single information space of the energy process during transportation. The peculiarity of the proposed work is the optimal combination of technological processes of transmission, consumption of electric energy and transportation, taking into account the specific conditions of functioning of the electrified section: points of connection of power sources and their type, profile of the track, schedule of trains, types of rolling stock and equipment. Conceptually, the hybrid traction power system is an electric hub, in which the inputs are generating points, and the output is the power supply system of the rolling stock. The internal structure of the electric power objects of the hub is determined by the type of transformation and accumulation of electric energy and ways of managing these objects in real time.
Identification of the Railway Reconstruction Parameters at Imposition of High Speed Traffic on the Existing Lines
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Lebid, Iryna; Kravchenya, Irina; Dubrovskaya, Tatyana; Luzhanska, Nataliia; Berezovyi, Mykola I.; Demchenko, Yevhen B.
ENG: Abstract. The problems of railroad design technical reconstruction aimed at ensuring train protection in introduction of high-speed traffic on the rail lines have been addressed. The description of railroad technical system with certain specific features has been proposed. The pair of mutually dual problems regarding the optimal reconstruction of railway curves for raising train speeds at minimal capital investments has been addressed. The problem of determining the optimal speeds of trains of each category under optimum outer rail cant, increase of the unbalanced acceleration value, compliance with the condition of uniform load on rail tracks, comfortable carriage of passengers, in which reduced costs on increased speeds in curved tracks will be minimal has been formulated. To achieve the goals of the study, mathematical optimization techniques and algorithms of analysis of the rail lines of different nature are used. This, by finding and value engineering optimization, allows to minimize high-value and lengthy procedures of physical simulation. As a problem-solving technique, Lagrange multiplier method and its applicability have been proposed. Numeral solution to the problem of selection of certain stretches for increasing rolling stock speeds on operating lines without reconstruction or with minimum expenses on reconstruction of contour of track has been reviewed.
Determining the Causes of Rolling Stock Derailment From the Track Using Modern Research Methods
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kuzyshyn, Andriy; Batig, Andriy V.; Sobolevska, Julia H.; Kostritsa, Sergei A.; Ursulyak, Lyudmila V.; Dovhaniuk, Stepan S.
EN: Abstract. The analysis of cases of rolling stock derailment from the track at PJSC «Ukrzaliznytsia» over the past 5 years has been carried out and their main types are given. It is noted that the rapid development and improvement of computer technology allows the use of computer and mathematical modelling in the study of cases of rolling stock derailment from the rail track, which makes it possible to take into account a combination of factors that have the main influence on the behavior of rolling stock when moving along the track. It has been established that the first step is the construction of a mathematical model of an object using a selected type of mathematical description: algebraic, differential, integral equations, discrete mathematics, set theory, and others. And the second step is the choice of a method for solving these models. The simulation methods are given, which, depending on the programming style, are divided into: procedural-oriented, object-oriented, logical-oriented, rule-oriented, and oriented to constraints. An objectoriented programming of a freight car has been developed, which will make it possible to evaluate its main dynamic indicators, in particular, indicators of stability from derailment. This in turn will facilitate the establishment of the main causes of rolling stock derailment from the rail track.
The Impact of Asymmetry on Equilibrium of Logistics Systems
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Savelieva, Irina; Melnikov, Serhij; Orlovska, Alexandra V.
EN: Abstract. The article examines one of the actual problems of the theory and practice of the logistics systems functioning related to the asymmetry of information in the transport services market. Assessing the level of asymmetry in logistics systems is of fundamental importance to increase the competitiveness of relevant systems. New approach formulated herein estimates the logistics systems asymmetry by taking into account information asymmetry about the quality of transport products, as well as information asymmetry about the quality of products within the boundaries of the corresponding supply chain. This approach allows to take into account its potential capabilities and increase functional stability in the process of logistics systems design.
The Effect of Ozone on Wet Atmospheric Corrosion of Aluminium of High-Voltage Lines
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Tatarchenko, Galina; Beloshitskaya, Nataliia; Sychenko, Viktor H.; Liashuk, Vitalii M.
EN: Annotation. One of the factors influencing traffic safety is the uninterrupted power supply of interlocking devices. As a rule transmission of electric energy is carried out using aluminum wires. In order to assess the reliability of power lines in the work, research was carried out on the influence of ozone on corrosion of aluminum in a humid atmosphere and acidic medium. It was found that the presence of oxygen dissolved in acetic acid leads to anode currents increase, while at crossover ozone, cathode currents increase by an order of magnitude and 2-3 times the anode decreases; the corrosion potential of an Ecor shifts to the positive side at 0.15V. The decrease in the density of anode currents in the presence of ozone proceeds due to the growth of the thickness of the aluminum oxide film. According to the Augerspectra, the film is increased by 3-4 times compared with the nonzonized medium, due to which the corrosion resistance of aluminum Кm increases from 0.066 to 0.025 g/(m2∙h). The rate of formation of oxides depends on the concentration of oxidants in the solution, and on their oxidative activity. According to calculations of thermodynamic factors that determine the preferred route of oxidation, the probability of formation of oxides in the presence of ozone is significantly higher. Local destruction of the protective layer occurs mainly in defective places and places of local increase in pH of the electrode layer. Investigation of the cyclic polarization of a sample of aluminum, pre-cathode activated by a current of 1 mA/cm2 density, showed the presence of hysteresis, which decreases in the next 2-3 cycles. In this case, the exterior of the aluminum shifts to (0.10 ÷ 0.15) V is more positive and the corrosion rate is reduced, which indicates the formation of an oxide film in which irreversible changes occur. The change in the inclination of the polarization curves indicates that the cathodic reaction is delayed and is associated with the change in the structure of the surface layer of the electrode and the diffusion restrictions of ozone recovery.
Modeling of the Atmosphere Pollution From Coal Trains
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaiev, Mykola M.; Kozachyna, Vitalii A.; Biliaieva, Viktoriia V.; Oladipo, Mutiu Olatoye; Chernyatyeva, Kateryna
EN: Abstract. Coal trains have an intensive impact on environment pollution. It is very important to predict adequately this impact during coal transportation. In Ukraine to predict atmosphere pollution from coal trains the regulatory model «OND-86» is used. This model does not take into account some important factors and coal train movement. We present numerical models to solve two problems:1) prediction of atmosphere pollution in the case of moving coal train; 2) prediction of atmosphere pollution in the case of additional special boards installation on the coal wagon. To solve these problems equation of coal duct convective- diffusive dispersion (Lagrange model of admixture dispersion) and equation of potential flow were used. Governing equations were numerically integrated using implicit difference schemes. For coding difference equations we used FORTRAN language. We present results of numerical experiments and laboratory experiments which illustrate the efficiency of the special additional boards installation on the coal wagon. These boards have «internal wing» and «external wing». The obtained results illustrate that installation of additional boards allows to minimize the atmosphere pollution near transport corridor.
Fryze Reactive Power of Trams in Eeffective Stochastic Rrecuperation Processes
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Bondar, Oleh I.; Kostin, Mykola O.; Mukha, Andrei; Sheikina, Olha H.; Levytska, Svitlana І.
ENG: Abstract. Urban electric transport system, particularly tram systems, is not a direct current system not only in traction mode but in regenerative modes as both voltage on a collector and regenerative current are stochastic abruptly variable processes. The above- mentioned facts determine availability of Fryze’s reactive power in this system that flows from a railway substation to trams, leads to incidental losses of energy and significantly reduces its quality. So evaluation of power effectiveness of the system in electrical trams operation is impossible without determining the level of reactive power in this system. We have analytical expression of reactive power by Fryze. Numerical calculations for trams type T3D and T4D in regenerative braking modes are done. Probabilistic statistical data processing operation of reactive power expressions is done. It is determined that reactive power changes in the limit of 10…100 kilo-volt ampere reactive with mathematical expectation – 37,0 kilo-volt ampere reactive. Statistical allocation of random power values are different. Numerical calculations of incidental losses, energy of recuperation are done and they range supplementary – 20% from total losses. It is stated that coefficient of reactive power of system route of trams is exceeding permissible value 0,25.
Systems Mutual Loadings of Traction Asynchronous Cars
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Afanasov, Andriy M.; Shapovalov, Oleksandr S.; Voitenko, Maryna V.
EN: Abstract. The review of methods of post-repair tests of traction asynchronous motors under conditions of locomotive depot is carried out.The necessity of introducing special stands for post-repair tests is shown in order to improve their quality, reduce the number of failures of service equipment, improve safety of the railway transport. Let's consider a question of power supply of the research asynchronous engine in wide frequency range and also a possibility of creation of the universal stand for testing important asynchronous engines of the electrorolling stock. Survey of possible versions of the scheme mutual loadings of asynchronous electrical machines which can be used for testing traction asynchronous engines of the rolling stock is executed. Such systems can be constructed both with use of the static converter of frequency, and without it. The given short characteristic of each alternative, certain advantages and shortcomings of each of system options. It is shown that systems with use of static converters of frequency differ in high power efficiency, allow to carry out tests in the wide frequency range of power supply, however have higher prime cost. Schemes without converters of frequency differ in smaller power efficiency, impossibility to carry out tests in the wide range of frequency of power supply, high level of consumption of reactive power . The results of the carried-out analysis can be used when choosing rational option of a system mutual loadings of asynchronous electric motors which will differ in higher functionality and power efficiency. Use of such systems will allow to lower capital expenditure for creation new and modernization of traction electrical machines that exist at the station for test.
Experimental Investigation of Actual Stuation of using and Accounting of Recovered Energy of Regenerative Braking Mode at the DC Traction System
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Bondar, Oleh I.; Ustymenko, Dmytro V.; Kurylenko, Olena Ya.; Kedria, Mykhailo M.; Karzova, Oksana O.; Krasnov, Roman V.; Baliichuk, Oleksii Yu.
ENG: Abstract. This paper deals with the problems of enhancement of registration and distribution of electric energy which can be obtained from DC electric locomotives by the regenerative braking. According to theoretical researches, it is possible to return approximately 8 - 12% of electric energy which is consumed for electric traction by using of a regenerative braking mode. However in recent years for electric traction networks of JSC “Ukrainian Railways”, this index doesn't exceed 2.6%. So we consider that the regenerative braking is one of the most prospective ways for energy saving in electric railway transport. Results of the experimental researches which were executed on DC traction substations and VL11M6 electric locomotives are described in this paper. Instantaneous values of voltage and current in different modes have been obtained. The electric energy balance for experimental zone has been performed. Also the ways of distribution and consumption of energy of regenerative braking mode have been analyzed. On this basis of the executed investigations, recommendations about providing of supercapacitor energy storage system for Ukrainian railways are proposed.
Investigation of Train Shunt Problem in Track Circuits of Signalling and Interlocking Devices
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Razgonov, Adam P.; Zhuravlov, Anton Yu.; Yashchuk, Kateryna I.; Shcheka, Vadym I.
EN: Abstract. The problems of electric track circuits calculating were investigated in the works of various authors, it is noted that there is no complete clarity on the definition of shunt resistance. The value of the calculated train shunt resistance in many respects affects the area of signaling systems rail channel stable operation and train traffic safety. It is relevant to study the possibilities of changing the standard value of and the conditions for the execution of track circuits shunt mode, especially for sections of railway with low resistance insulation of the rail line. The surface area of the “wheel-rail” skating, taking into account the different conditions of interaction dynamics and wear of rails and wheel elements were obtained in article. It is shown that the reduction of the normative value of the resistance of the train shunt is appropriate for signaling systems, especially for sections of railway with low resistance insulation of the rail line. An approximate estimate of the geometric parameters of the membrane that forms on the “wheelrail” surface is obtained; proposed a more complete electrical replacing scheme for the train shunt circuit, which allows analyzing the influence of the circuit elements parameters values and the frequency of the signal current. A method for calculating the correlation dependence of the train shunt resistance from wheel-rail surface membrane parameters is proposed.
Model for Building Traction Information of Suburban Rolling Stock on Hydrogen Fuel
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Falendysh, Anatoly; Dzhus, Volodymyr S.; Kletska, Olha; Kosariev, Oleg; Dizo, Jan
EN: Abstract. The materials consider the possibility of using hydrogen as a fuel for suburban rolling stock in Ukraine. The analysis of the use of hydrogen fuel in transport in various countries of the world is carried out. One of the main stages of calculating the rolling stock is the construction of its traction characteristic, which largely depends on the type of power plant. Therefore, a model has been developed for constructing traction characteristics of a suburban rolling stock when it is converted to hydrogen fuel. For this purpose, an analysis of power equipment with an energy source from a polymer of an exchange membrane fuel cell and methods of connecting their batteries to blocks is done. The scheme of power transmission for the rolling stock is proposed and its efficiency coefficient is preliminarily calculated. The main technical indicators of suburban rolling stock in Ukraine at the moment and using proton-exchange membrane fuel cells on it are considered. Preliminary consideration is given to the operation parameters of the electric circuit of the rolling stock under various modes of its motion. The traction characteristic of a suburban mobile suction on hydrogen fuel is constructed. The proposed model is implemented in the software product MathLab.
Improving the Energy Efficiency of Operation of Elements of the Structures of the Rolling Stock by Means of Surface Engineering
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kopylov, Vyacheslav; Kuzin, Oleg A.; Kuzin, Mykola O.
EN: Abstract. The manufacture of rolling stock components with a given life cycle based on the computerization of all design and production stages is the most promising way to increase the energy efficiency of its operation. The implementation of this approach requires the expansion of the use of technologies that provide parts with a high level of mechanical and operational properties. The state of the surface layers is important in the formation of the reliability parameters of high-loaded parts. The principles of using system approaches for the physical justification of the choice of the optimal modes of engineering grain boundaries depending on the operating conditions of products are presented. New approaches and algorithms have been created that allow quantitative and qualitative studies of the effect of technological treatments and the chemical composition of polycrystals on the strength of grain boundaries and the processes of softening of the boundary zones. Using the developed techniques, the ways to control the energy state of the internal interfaces by doping, microalloying and heat treatment were determined to increase the resistance to brittle fracture and wear of the steels used in the manufacture and repair of rolling stock.
Distribution of Information Flows in the Advanced Network of MPLS of Railway Transport by Means of a Neural Model
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Zhukovyts’kyy, Ihor; Pakhomova, Victoria N.; Domanskay, Halyna; Nechaiev, Andrew
ENG: Abstract. Ensuring interoperability of railway transport is possible only due to the developed information structure. Today, Ukraine uses the information-telecommunication system (ITS) of railway transport, which is based on a data communication network. The effectiveness of its work is largely determined by the routing system. The current algorithm for choosing the shortest route, which is used in the existing routing protocol (OSPF), does not always lead to an effective result. However, there is MPLS technology, which could improve the quality of the ITS network by creating virtual channels between its nodes. The authors proposed a scheme for selecting tunnels for the flows in the MPLS network, which is based on the neural model of a multilayer perceptron of configuration 18–3–3–10 with the activation function Softmax in hidden layers and a linear activation function in the input layer. To simulate the network operation, flow data is needed: class of service (CoS), sender and recipient identifiers, average flow rate vector and tunnel data (their initial load). The final load of the tunnels is taken as the resulting output of the neural network, on the basis of which the tunnel is selected for the flow of the k-th class of service.
Development of an Algorithm for Investigation of Technical State of Wagons’ Running Gears During Their Derailment
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Batig, Andriy V.; Hrytsyshyn, Petro; Kuzyshyn, Andriy; Milyanych, Andriy R.; Voznyak, Oleh M.; Tereshchak, Yuriy V.
EN: Abstract. A freight wagon is a collection of a large number of parts and assemblies that form a single structure. During wagon operation, there are gradual changes in the characteristics and parameters of its structural elements. That is, the parameters of its constituent elements change – their numerical values increase or decrease that result in a change of the unit’s technical state, and, in turn, affects the totality of its performance. Gradually accumulating, the changes in the parameters of the structural elements of a wagon reach such a level that radical, sometimes abrupt qualitative change occurs. A malfunction that has not been repaired timely may lead to a failure of a wagon structural element, which, in turn, may result in rolling stock derailment. It has been established that the loss of stability of freight wagons during their movement is most often due to their unsatisfactory dynamic properties, which can be explained by design features and technical state of running gears. In this regard, the authors of the article have developed an algorithm for investigation technical state of running gears of freight wagons and determined the effect of their parameters’ deviation on rolling stock operation with possible further derailment.
Artificial Neural Network Based Detection of Neutral Relay Defects
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Havryliuk, Volodymyr I.
EN: Abstract. The problem considered in the work is concerned to the automatic detecting and identifying defects in a neutral relay. The special design of electromechanical neutral relays is responsible for the strong asymmetry of its output signal for all possible safety-critical influences, and therefore neutral relays have negligible values of dangerous failures rate. To ensure the safe operation of relay-based train control systems, electromechanical relays should be periodically subjected to routine maintenance, during which their main operating parameters are measured, and the relays are set up in accordance with technical regulations. These measurements are mainly done manually, so they take a lot of time (up to four hours per relay), are expensive, and the results are subjective. In recent years, fault diagnosis methods based on artificial neural networks (ANN) have received considerable attention. The ANN-based classification of relay defects using the time dependence of the transient current in the relay coil during its switching is very promising for practical utilization, but for efficient use of ANN a lot of data is required to train the artificial neural network. To reduce the ANN training time, a pre-processing of the time dependence of relay transient current was proposed using wavelet transform and wavelet energy entropy, which makes it possible to reveal the features of the main defects of the relay armature, contact springs, and magnetic system. The effectiveness of the proposed approach for automatic detecting and identifying of the neutral relays defects was confirmed during testing of the relays with various artificially created defects.
Stability of the Railway Subgrade under Condition of Its Elements Damage and Severe Environment
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kovalchuk, Vitalii V.; Sysyn, Mykola P.; Nabochenko, Olga S.; Pentsak, Andrii Ya.; Voznyak, Oleg M.; Kinter, Stepan O.
EN: Abstract. Investigation of damages of the subgrade slope in combination with its overwetting and rolling stock loading, which significantly affects safety traffic of the railway transport, has been carried out. The complex method of slope stability estimation of the subgrade is developed, which includes calculation of loads and vibration action of rolling stock on the main site of the subgrade, as well as the dynamic model of vibrations propagation in the body of the subgrade embankment and the model of plastic deformations accumulation. Dynamic and nonlinear plastic models are based on a finite-element model of the cross section of the subgrade. The plastic model takes into account the characteristics of soil strength of the subgrade, depending on the area of the vibration load impact. The developed method allows to carry out the estimation of external and internal factors impact on occurrence of subgrade destruction, which is of practical value for safety state estimation of the railway transport.
The Economic Guarantee of Logistic Connections Optimization at Railway Transport
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kopytko, Vasyl; Dziuba, Sergei; Mìshchenko, Maxym; Shargun, Tetyana
EN: Abstract. The efficiency increasing of railway transport functioning is a main factor in the economic growth of the national economy. Material reserves are the main factor that defines the strategy of the enterprise and influences on the economic optimization level of logistic connections in general. Waste on deficiency and expense of storing the taken out from the main turnover material reserves redouble the economic situation. In this research the sources of the arising an uncertainty by taking a decision about economic optimization of logistic connections and working out methods of need determination in conditions of a certain uncertainty that will be led to improvement of the economic effectiveness of activity are determined. The best methods that may be used for this purpose are analysis of temporary series, multiple regression and correlation analysis, pattern recognition. The paper presents the results of research that allow, based on the built neuro-fuzzy model, to evaluate the dependence of macroeconomic indicators of the national economy of Ukraine on the indicators characterizing its economic situation in order to improve the control efficiency of logistics systems. The built neuro-fuzzy model, unlike existing models, allows reproducing the complex nonlinear dependences.
Improving the Performance Parameters of Railway Wheels with the Help of Optimal Design Technologies of their Electric Pulse Processing
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Vakulenko, Igor A.; Kuzin, Nickolai O.; Vakulenko, Leonid I.; Raksha, Sergey V.; Proidak, Svetlana V.
ENG: Abstract. The processing by pulses of electric current (PEC) of a fragment of the rim of a railway wheel was carried out on the DS10D equipment. When the density of the electric current is from 3 to 17 A/mm2, the processing cycle consisted of the action of a pulse with a duration of 2.5-3 s and a pause between pulses of 4 s. After 150 cycles of PEC, the hardness of cold-formed metal was reduced from 10 to 20%. Studies of the parameters of the metal structure of the wheels have determined that the processing of PEC leads to a decrease in the number of defects in the internal structure, which are accumulated as a result of cold deformation of the rim along the rolling surface of the railway wheel. It has been established that, according to the nature of the influence on the hardness distribution of carbon steel, the PEC treatment corresponds to changes during tempering in the average temperature range and allows to significantly increase the operating parameters of the wheels of railway equipment.
The Intensity of Rail Failure Flow
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Patlasov, Oleksandr M.; Fedorenko, Yelizaveta M.
EN: Abstract. The article reveals the quantitative changes in the intensity of failure accumulations in areas with gradual introduction of high axial loads. To obtain the actual values, the authors received threedimensional array of intensity of rail failure flow. According to the results of the research, it was discovered that the main cause of failure of the rails are the defects in the main contact-fatigue origin. The main factor that impacts the intensity of the rail failure flow is the number of transmitted tonnage. The size of the axial load and curvature of the line pours weight on this process. The proposed rail failure model is a model that can be used to optimize the track maintenance system. The authors conducted a study on the identification of quantitative changes in the intensity of accumulation of track failures in areas with high axial loads and evaluated their influence on the planning of repair and road works. On the basis of the obtained results it is possible to estimate the effect of the axial load on the intensity of changes in the state of the flow rail failure flows.
Atmosphere Pollution Modeling in the Case of Accident During Rocket Propellant Transportation by Trains
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaiev, Mykola M.; Biliaieva, Viktoriia V.; Kozachyna, Vitalii A.; Berlov, Oleksandr V.; Gunko, Olena Yu.; Chernyatyeva, Kateryna
EN: Abstract. At present time, in Ukraine the intensive development of solid-propellant missiles takes place. These missiles are called «Grim», «Grim-2», etc. Transportation of rocket propellant very often is carried out by trains. In the case of accident during such transportation great amount of toxic chemicals may be emitted into atmosphere. It is very important to predict the atmosphere pollution level near railways transport corridors to obtain the realistic information about the size of possible zones of hitting. To forecast the atmosphere pollution in the case of rocket propellant burning in railway wagon numerical models have been developed. These models are developed to predict the atmosphere pollution in two scales. The first scale is the simulation of the atmosphere pollution near the railway tracks (so called “local scale”). The second scale is the simulation of the atmosphere pollution on the territory which is adjacent to the railway tracks («urban scale»). The forecast is based on the Lagrangian model of toxic chemical dispersion. The models allow also to predict acid rain formation in the case of solid propellant burning products dispersion into atmosphere. To solve the governing equations we used difference schemes of splitting. The results of numerical experiments are presented.
Resource-Saving Method of Forming Information Infrastructure of Sorting Stations
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kosolapov, Anatolii A.
EN: Abstract. The paper proposes a resource-saving method of conceptual design of the information infrastructure of railway objects on the example of a distributed computer control system of a marshalling yard. This method allows determining the economically optimal degree of decentralization of the technical structure of the management system.
Improving the Safety of Railway Subgrade When it is Strengthened Using Soil-Cement Elements
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Krysan, Vitalii; Krysan, Volodymyr; Petrenko, Volodymyr D.; Tiutkin, Oleksii L.; Andrieiev, Volodymyr S.
ENG: Abstract. The article identifies the main parameters of the drilling-mixing technology, which is the most effective in fixing weak soil bases during the construction and restoration of transport, industrial and civil structures. The difference of the technology developed by the authors is that the strengthening process is carried out at low pressure (0.15 ... 0.25 MPa). The relevance of the research is that the proposed technology requires less cost with high rates of restoring the strength of soil foundations. To prove the high quality of the technology, laboratory studies were carried out to determine the optimal characteristics of the soil-cement element, as well as the proportions and composition of the fixing solution. The dependences of the strength of soil-cement elements in the air-dry condition with cement content from 7% to 23% with water-cement ratio in solution 1 / 0.3 and with cement content from 13% to 37.5% with water-cement ratio in solution 1/0,6. During the experimental-industrial studies of the author's technology, the embankment was constructed with the soil-cement-reinforced elements for the access road approaches at one of the facilities in Kirovograd region, which ensured safety in the operation of a complex transport structure.
Non-Destructive Control Data Analysis of Railroad Foundation Constructions
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Trofimov, Alexander; Kuzmenko, Albina I.; Nesterenko, Halyna I.; Avramenko, Svitlana I.; Muzykin, Mykhailo I.; Mormul, Nikolaj; Sokhatsky, Anatoliy
ENG: Abstract. The evaluation of the parameters of multi-layered foundations (railroad basis, foundations of railway structures, etc.) plays an important role in ensuring the safe movement of trains. The method of estimating the mechanical and geometric parameters of such foundations based on the solutions of inverse problems for multi-layered elastic packets is proposed. As input data for such problems the measured displacements of certain points on the package surface are used. The method allows estimating the parameters of the a priori distribution of unknown variable parameters, identifying and excluding outliers of the measured data from the created model, and constructing a posteriori estimation of the unknown parameters probability density with acceptable resolution. Proposed method can be used to create a new generation of equipment intended for non-destructive monitoring and estimating of the condition of the railroad basis and the foundations of artificial structures. The appropriate software of such vehicles based on the developed methods of data processing can be developed. The use of such equipment allows to operatively analyzing the state of individual areas of the railroad to decide on the need of repairing or replacing the railroad base or foundation of other elements of railroad infrastructure.
Risk Assessment in Case of Toxic Chemical Emission at Railway Transport
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Biliaieva, Viktoriia V.; Mashykhina, Polina B.; Kalashnikov, Ivan V.; Berlov, Oleksandr V.; Kravets, Ivan B.
EN: Abstract. Risk assessment during emission of toxic chemicals at railway transport is the problem of great scientific interest. To make such assessment we need special computer models. At present, in Ukraine,we have lack of such models. The authors present numerical models for territorial risk assessment in case of organized emissionsat railway transport (for example, emissions during locomotive movement) and in case of accident emissions (accident spills of dangerous cargo, emissions of NH3 from railway tank, etc.).The basis of the developed numerical models is the system of fundamental equations of fluid dynamics.These equations are solved numerically using implicit schemes of splitting. The developed models allow to take into account some important factors which influence the territorial risk value: probability of atmosphere conditions, train route, transport infrastructure at railway stations, probability of emission site.Also the process of pollutant chemical transformation in the atmosphere is taken into account in the developed models. The developed models allow to predict territorial risk in case of moving source of emission (moving damaged railway tank).The results of numerical experiments are presented. These results illustrate territorial risk maps for different sites near Prydniprovska railway.
Improvement of Energy Indicators of Conventional Electric Driving Asynchronous Motors of Non-Standard Technological Equipment at the Enterprises for Repair of Railway Rolling Stock Through the use of Energy-Saving Motors
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Bondar, Oleh I.; Baliichuk, Oleksii Yu.; Karzova, Oksana O.; Krasnov, Roman V.; Marenych, Oksana L.; Ustimenko, Dmytro
ENG: Abstract. The purpose of this work is to study the utilization efficiency of electric driving energy-saving motors of non-standard technological equipment meant for repair of railway rolling stock, in terms of improvement of energy performance, i.e. improvement of efficiency factors and power factors, and decrease of power losses as compared with the most commonly used “conventional” asynchronous motors. There are two options for improvement of the energy performance of electric drives of non-standard technological equipment: replacement of a conventional motor with an energy-saving one similar in terms of nominal voltage, rotational speed, power, etc.; changeover of stator winding from “delta” to “star”. A special technique has been proposed to determine the effectiveness of this changeover in terms of improvement of energy indicators. Comparison of the real values of the energy indicators of conventional motors and energy-saving motors in the case under consideration is required to perform the technical and economic calculations when solving the problem of the expediency of replacement of conventional asynchronous motors with energy-saving motors in the abovementioned equipment.
Methodology of Risk Assessment and Forms of Environmental Safety Management for the Transport of Dangerous Goods by Railway Transport
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Zelenko, Yuliia V.; Dzhus, Oleh; Dzhus, Volodymyr S.; Yanchenko, Dmytro A.
EN: The authors examined the scientific basis for managing environmental and economic risks in the transport of dangerous goods by rail. The importance of optimizing the monitoring of environmental safety and the organization of environmental risk management was noted. The paper presents the interrelation of the functional strategy of ensuring the reliability of the transportation process with other strategies. A new functional strategy and a schematic diagram of the environmental management system for making management decisions to optimize environmental management in railway transport have been proposed. A conceptual apparatus has been developed to identify and determine environmental risks and the principle of their management during the transport of dangerous goods by railway transport.
Classification of Quality Conditions of a Traction Motor Frame Insulation of Locomotives
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kapitsa, Michail І.; Laguta, Vasiliy V.; Kozik, Yuriy
ENG: Abstract. The objective of the article is to determine the quality conditions of a locomotive traction motor frame insulation based on observations over the recovery voltage and classification of a tested insulation wear degree as well as to determine estimates of operating time until the insulation restoration or replacement with a new one. To classify the insulation quality conditions and to forecast its residual life until the restoration, a cluster analysis and discriminant analysis are used based on indicators reflecting the properties of an insulation recovery voltage curve. The study defines an information content received from frame insulation recovery voltage readings as compared with its resistance from the perspective of testing the insulation condition and predicting its residual life. Statistical characteristics of clusters corresponding to the insulation condition stages allow determining the limit values of predicting parameters and estimating the residual insulation life prior the restoration. To classify the insulation condition, an integrated evaluation of the insulation condition quality is proposed. Integrated evaluation is performed according to the recovery voltage curve and is used as an indicator during clustering. An experimental study of the proposed method practically confirmed its effectiveness.
Optimization of the Design of Relay Valves for Rail Vehicles Braking Systems in the Context of Train Traffic Safety
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Tomaszewski, Sylwin; Tomaszewski, Franciszek; Stawecki, Włodzimierz; Urbański, Patryk; Far, Mariusz; Bolzhelarskyi, Yaroslav
EN: Abstract. The article presents the functions of the relay valve and its place in brake systems of rail vehicles. The relay valve were divided according to their type, the structure and principle of their operation were discussed, and examples of rail vehicles and modules in which relay valves are installed are presented. Because of their function in braking systems the relay valves should be characterized by high reliability and correct carrying out the tasks in the braking system of rail vehicles. The article describes selected structural factors affecting the operation of the relay valve and which are important for ensuring the safety of train traffic. Such factors are the lubricants used in the relay valves and the way of controlling it simultaneously with two signals with the function of an alternative that eliminates unreliable elements of the braking system. The analysis of the test results of the lubricant parameters and the testing of the relay valves on the test bench showed that the correctness of the relay valves depends essentially on the properties of the lubricant used, especially at low temperatures. On the basis of the tests carried out, a grease was selected that at low temperatures meets the criteria for correct and reliable operation of relay valves in rail vehicles. In terms of the control method, a comparison of two control signal delivery systems to the relay valve has been made, a new design solution is presented that ensures greater operational reliability and thus greater safety of the train traffic.
Railway Transportation of Dangerous Goods: a Bibliometric Aspect
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kolesnykova, Tetiana O.; Matveyeva, Olena V.; Manashkin, Lev A.; Mishchenko, Maksym I.
ENG: Abstract. The purpose of this paper is to research and define the promising worldwide scientific trends in the field of railway transportation of various dangerous goods. To obtain relevant empirical data, the authors reviewed the world literature on paper topic using Scopus and Web of Science citation bases. We determined that this research was focused on several major thematic areas: 1) automation and telematics systems; 2) navigation systems; 3) logistics; 4) energy; 5) locomotives; 6) freight cars; 7) materials; 8) rails; 9) impact on the environment and people. The article used mapping, ensuring a visual perspective for researchers and helping to understand general situations in specific subject areas of the research. This study provides useful information concerning the development of the field of research for the railway transportation of dangerous goods, identifying those academics (authors, countries and institutions) that have made the greatest contribution to its development and defining the priority research directions.
Stress-Strain State Analysis of the Leading Car Body of DPKr-2 Diesel Train under Action of Design and Operational Loads
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kostritsa, Sergei; Pshinko, Alexander; Ursulyak, Ludmila; Kuzyshyn, Andriy; Kramarenko, Maxim; Grechkin, Alex
EN: Abstract. Purpose. Provision of strength and durability of the main structural element of DPKr-2 diesel train - the leading car body. Methodology. A spatial solid-state 3-D model of the body is built and durability calculations are carried out concerning action of loads stipulated by regulatory documents operating in Ukraine. In particular, the following main estimated modes are considered: mode 1 – a notional safety mode which takes into account the possibility of considerable longitudinal forces arising during shunting movements, transportation and accidental collision; mode 2 – an operational mode which takes into account forces acting on a train during acceleration to constructional speed, coasting or braking from this speed while passing a curve. Results. Based on the results of theoretical and experimental studies a conclusion has been made that the leading car body construction of DPKr-2 diesel train meets the requirements of regulatory documents regarding strength and durability. Practical relevance. A complex of calculation and experimental work concerning assessment of stress-strain state of the leading car body of DPKr-2 diesel train under action of design and operational loads allowed the creation of construction which meets not only operational requirements but also strength and durability ones.
The Hybrid Trains in International Logistics Transportation
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kaira, Zoia; Golovkova, Liudmila S.; Rekun, Ivan I.; Trubai, Yurii
ENG: Abstract. Analytical information for the market players concerning to the overall future hybrid train market and the subsegments is considered. The forecast of the volume railway transportation in Ukraine is represented in the paper. The aim of the paper is to examine the role of hybrid trains in logistics transportation segment under escalating importance of international logistics where transport segment is influenced in largely degree of political, economic, social, technological, environmental and legal changes. The paper is targeted the stakeholders to provide with information on key market drivers, restraints, challenges, and opportunities.
Analysis of the Electric Energy Consumption Components for Mine Train Traction
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Arpul, Serhii V.; Artemchuk, Viktor V.; Babyak, Mykola O.; Vasilyev, Viacheslav E.; Hetman, Hennadii K.; Marikutsa, Serhii L.
EN: Abstract. The paper considers the issues of reducing the energy intensity of transportation at opencast mining enterprises, the relevance of which has now increased due to the rise in the cost of fuel and energy resources. It presents the study results concerning the cost structure of the electricity consumed by electric mine transport, which form the basis for the development of technical and operational measures to reduce the energy intensity of the transportation process. It is shown that the work to reduce the electricity consumption for mined rock transportation should be aimed at: - Reduction of losses in the power circuits of the traction rolling stock due to the use of more advanced electric rolling stock and regulation of the degree of utilization of the installed traction power; - Introduction of new contact materials for electrical circuits with the lowest possible resistivity, including for current collector plates; - Introduction of measures to reduce energy consumption for power supply of auxiliary circuits; - Development and implementation of rational train control techniques. The introduction of energy-saving measures should include the development and application of effective methods for calculating individual norms of energy consumption and incentives for energy saving of the employees involved in the organization of the transportation process.
Mathematical Modelling of the Communication Channel between the Rail Circuit and the Inputs Devices of Automatic Locomotive Signalization
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Hololobova, Oksana O.; Buriak, Serhii Yu.; Havryliuk, Volodymyr I.; Skovron, Ihor Ya.; Nazarov, Oleksii A.
ENG: Abstract. In modern practice of operating under traffic safety conditions, the traffic light signal must be transmitted to the locomotive that moves to it, and duplicate in the driver's cab. However, this communication channel is not protected from external interference. In order to prevent the occurrence of code failure, it is necessary to create conditions under which the automatic locomotive signalling system will distinguish between signals with useful information, from signals with false information. The best way to solve this problem at the first stage is to model the devices. Using the simulation tools of graphical environment of simulation modelling Simulink from Matlab software environment, the software model of the communication channel between the railroad and the input devices of automatic locomotive signalling system was constructed. The created mathematical model with the actual parameters allows us to obtain diagnostic signs of a proper condition, on the basis of which the research is aimed at the identification, recognition and definition of various types of malfunctions, failure, damages and defects in the work of the constituent elements of the system and the signal transmission channel of the automatic locomotive signalling system.
Comparison of Motor Coach Exhaust Emissions in Real Operating Conditions for Different Testing Procedures
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Gallas, Dawid; Merkisz, Jerzy; Andrzejewski, Maciej; Tomaszewski, Sylwin; Strzemkowski, Jan; Kinter, Stepan O.
EN: Abstract. The article discusses the results of applying real driving emissions (RDE) testing methods in measuring the exhaust emissions of a passenger rail vehicle. Portable Emissions Measuring Systems (PEMS) were used to measure the exhaust emissions from a motor coach in real operation, performed on a test track for selected drive cycle parameters. The road emission values of exhaust components have been calculated and compared to road vehicles and road exhaust emission limits based on the legal norms. The assessment was concluded with a comparison of the environmental cost, in terms of exhaust emissions, of transporting passengers using the tested rail vehicle relative to alternative road transport, based on measurements in real operating conditions.
Investigation of Possibility of Hopper Cars Unloading on the Car Dumper VRS–134M
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Dovhaniuk, Stepan S.; Kalashnyk, Volodymyr O.; Reidemeister, Alexey G.; Shykunov, Oleksandr A.
EN: Abstract. It was developed a computational model to evaluate the body strength of short base hopper models 19-758-01, 20-471, and 20-4015 when unloading them on the car dumper VRS–134M. Modeling of the stress-strain state of the car design was made using the finite element method. It was established that in terms of strength, bodies of the hopper models 19-758-01, 20-471, and 20-4015 are suitable for unloading on car dumper. The results of experimental studies showed sufficiently high accuracy of the chosen computational model for estimating the stress-strain state of design and confirmed the possibility of hopper car unloading on the car dumper VRS–134M.
Study of Rail Vehicles Movement Characteristics Improvement in Curves Using Fuzzy Logic Mechatronic Systems
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kapitsa, Michail І.; Mikhailov, Evgen; Kliuiev, Sergii; Semenov, Stanislav; Kovtanets, Maksim
ENG: The article deals with the effectiveness of reducing the level of force interaction of the rail vehicle wheels with rails in curved sections of the track through the use of mechatronic position control systems for wheel pairs in the rail gauge in the horizontal plane. The approaches to the creation of such a mechatronic system operating on the principles of fuzzy logic are described. To determine the angles of attack of wheels on the rails, it was proposed to use the acoustic emission indicators of the contact of the wheel with the rail. To determine the direction of curvature of the rail track, it is advisable to use data from navigation systems. The study of the dynamics of the rail vehicle during the passage of a curved section of the track in real time was carried out using the Matlab/Simulink software package. The proposed mechatronic control system for the position of the wheel sets in the horizontal plane allows to ensure their optimal installation under various driving conditions in the rail gauge. This makes it possible to minimize the angles of attack of the wheels and reduce the forces of the horizontal interaction of the wheels with the rails.
Justification of Parameters of Wheelset Axle Fatigue Strength Test-Bench for Railway Rolling Stock
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kuropiatnyk, Oleksii S.; Raksha, Serhii V.; Anofriev, Pavlo G.
ENG: Abstract. The operation safety of the railway rolling stock depends directly on the strength of the base part of the wheelset – its axle. Therefore, in recent years numerous studies of theoretical and experimental nature, both for means of rail transport, and for machines containing rail track equipment are carried out. This paper substantiates the main parameters of the fatigue test bench for axles for wheelsets of railway rolling stock. We performed an analysis of the load schema for bench tests, determined the dependence of the bench work force on the parameters of the wheelset axle. In addition, we substantiated the design and parameters of vibrator. For the research, we adopted the following criteria of rationality: work force, energy consumption and longitudinal dimension of the test bench. The design is considered the best, if these criteria acquire the smallest values. The results of the research indicate that the load scheme “cantilever beam” is rational for the fatigue bench tests of the axles for wheelsets of railway rolling stock. The best design of the vibrator have to provide the test bench work force by rotating the unbalanced mass around the stationary wheelset axle. The rational vibrator contains a sectoral eccentric mass rotating at an angular velocity of about 150 s-1. In this case, the eccentric mass value is about 80 kg, and its eccentricity is 135 mm.
Energy-Efficient and Cost-Effective Methods of Driving Trains under the Conditions of Development of the Electricity Market
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Pshynko, Alexander N.; Afanasov, Andriy M.; Kuznetsov, Valeriy; Skalozub, Vladyslav V.; Arpul, Serhii V.; Ivanov, Alexander P.
ENG: Abstract. The article for the first time considers the possibilities for the organization of cost-effective rail transportation on electrified section in terms of the functioning of the Ukrainian balancing electricity market. It is formulated the complex task of choosing effective mechanisms of purchase and sale on the electricity market on the basis of contracts for the implementation of markets "for the day ahead", as well as for the appointment of parameters and tariffs of the intraday market. The authors presented the models and results of calculations of optimum modes of trains’ driving, which are calculated for various criteria of efficiency taking into account the cost of the consumed active and reactive electric energy. The technique of tariff formation for purchase of electricity on the balancing market was proposed.
Capital Investments in the Context of Sustainable Development of Railways
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Kharchenko, Olesia I.; Okorokov, Andrii; Vernigora, Roman V.; Tsuprov, Pavlo; Papakhov, Oleksandr Yu.; Logvinova, Nataliia A.
ENG: Abstract. Ukraine, due to its geographical position and developed transport infrastructure, has significant potential as a transit country, primarily in the supply chain of trade between Asia and Europe. According to the estimates of the British Institute for Transport Rendell Ukraine, the transit coefficient of Ukraine is 3,75 (with a maximum of 5); This is the best indicator among the countries of Europe (for comparison, in Poland, which occupies the second place, this indicator is 2,92). Nowadays, Ukraine uses its transit potential extremely insufficiently and inefficiently; over the past 10 years, the volume of transit traffic through the territory of Ukraine has declined by more than 2,5 times, primarily due to the fall in transit traffic by rail. One of the reasons for this situation is, of course, the general political and economic situation in the country. However, there are a number of other negative factors that prevent Ukraine from fully and effectively using its transit potential. These problems lie both in the purely technical plane (deterioration of transport infrastructure and rolling stock, lack of capacity of the main transport routes, underdevelopment of logistics terminals in the country and at land borders, difference in width with the European railway system) and the legislato-thick (high level of port dues, bureaucratization and regulation of customs procedures, lack of flexible tariff policy for carriers, etc.).
Modelling of the Electric Locomotion DS3 Working
(Dnipro National University of Railway Transport named after Academician V. Lazaryan, 2019) Bannikov, Dmytro O.; Radkevich, Anatoliy V.; Muntian, Antonina O.
ENG: Abstract. The purpose of the work is to evaluate the spatial distribution of the rigidity of the carrier frame and the body of the Ukrainian electric locomotive DC3 as a single system during operation and repair. The research was carried out on the basis of the finite element method with the application of design and computing complex SCAD for Windows. The numerical model of the electric locomotive was built, tested and then used to identify the causes and providing guidance on solving some specific operational questions. They are included, for example, the possibility of eliminating the body skew when jacking up on jacks and jamming the door as a result. The researches showed that the structure of the electric locomotive DS3 in general has a rather high spatial rigidity, both in transverse and longitudinal directions, and on torsion. However, for some practical repair tasks there is not enough for that rigidity. It was recommended to increase the thickness of the shell of its body up to 4 mm or the roof up to 8 mm, which leads to an increasing in the total mass of the machine by about 2,5 and 3,5 tons, respectively.