Наука та прогрес транспорту.
Permanent URI for this communityhttp://crust.ust.edu.ua/handle/123456789/1665
У даному репозитарії представлені електронні версії статей, автори яких є членами співтовариства університету.
Повний випуск кожного видання доступний http://stp.ust.edu.ua/
до 2013 року виходив під назвою "Вісник Дніпропетровського національного університету залізничного транспорту імені академіка В. Лазаряна"
Science and Transport Progress.
This repository contains e-articles whose authors are members of the community of the university.
Full version http://stp.ust.edu.ua/
until 2013 appeared under the title "Bulletin of Dnepropetrovsk National University of Railway Transport named after Academician V. Lazaryan"
Browse
Now showing 1 - 3 of 3
- Results Per Page
- Sort Options
Item type:Item, Choosing the System of Locomotive Maintenance in View of the Effect of Dependent Failures(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпро, 2018) Bodnar, Borys Ye.; Ochkasov, Oleksandr B.; Hryshechkina, Tatiana S.; Bodnar, Yevhen B.ENG: Purpose. Improving the efficiency of the use of locomotives by choosing a rational maintenance system that takes into account the assessment of the effect of dependent failures on the cost of their life cycle is the main purpose of this paper. Methodology. The relevance of introducing LCC (life cycle cost) approaches in locomotive facilities is explained by the introduction of new locomotives with on-board control and diagnostic systems, as well as the development of the theory of traction rolling stock maintenance systems. The cost of a locomotive as a traction unit ceases to be the determining factor. This is because the locomotive maintenance and repair cost for the entire period of its operation is much higher than the initial cost of the locomotive. The paper analyses the existing approaches to managing the cost of the life cycle of locomotives at the stages of selecting, updating, upgrading and operating the traction rolling stock. The necessity of improving the methods for assessing the degree of influence of reliability indicators of locomotive assemblies on the choice of the maintenance system and the cost of the locomotive life cycle is substantiated. Findings. It is proposed to use the concept of «the effect of dependent failures» when calculating the cost of locomotive renewal after unscheduled repairs and its life cycle cost. We improved the methods for determining the cost of unscheduled repairs, taking into account dependent failures and the coefficient of assessment of the effect of dependent node failure on the locomotive maintenance system. The proposed coefficient will determine the nodes, the failure of which affects the renewal cost more than their nominal value. It will also help to take into account the probable losses due to node failure during the development and adjustment of the locomotive maintenance system. Originality. For the first time, it is proposed to use the concept of the effect of de-pendent failures to calculate the locomotive renewal cost when performing unscheduled repairs, as well as the loco-motive life cycle cost. Practical value. The improved calculation method for determining the cost of unplanned repairs with account taken of dependent failures can be used to compare and evaluate different variants of the locomotive maintenance system and to develop the locomotive diagnostic systems.Item type:Item, Energy Efficiency of Diesel locomotive Hydraulic Transmission Tests at locomotive Repair Plant(Дніпропетровський національний університет залізничного транспорту імені академіка В. Лазаряна, Дніпропетровськ, 2015) Bodnar, Borys Ye.; Kapitsa, Mykhaylo I.; Ochkasov, Oleksandr B.; Koreniuk, Roman O.ENG: Purpose. In difficult economic conditions, cost reduction of electricity consumption for the needs of production is an urgent task for the country’s industrial enterprises. Technical specifications of enterprises, which repair diesel locomotive hydraulic transmission, recommend conducting a certain amount of evaluation and regulatory tests to monitor their condition after repair. Experience shows that a significant portion of hydraulic transmission defects is revealed by bench tests. The advantages of bench tests include the ability to detect defects after repair, ease of maintenance of the hydraulic transmission and relatively low labour intensity for eliminating defects. The quality of these tests results in the transmission resource and its efficiency. Improvement of the technology of plant post-repairs hydraulic tests in order to reduce electricity consumption while testing. Methodology. The possible options for hydraulic transmission test bench improvement were analysed. There was proposed an energy efficiency method for diesel locomotive hydraulic transmission testing in locomotive repair plant environment. This is achieved by installing additional drive motor which receives power from the load generator. Findings. Based on the conducted analysis the necessity of improving the plant stand testing of hydraulic transmission was proved. The variants of the stand modernization were examined. The test stand modernization analysis was conducted. Originality. The possibility of using electric power load generator to power the stand electric drive motor or the additional drive motor was theoretically substantiated. Practical value. A variant of hydraulic transmission test stand based on the mutual load method was proposed. Using this method increases the hydraulic transmission load range and power consumption by stand remains unchanged. The additional drive motor will increase the speed of the input shaft that in its turn will allow testing in closer to real conditions as a result of increased load on the hydraulic transmission. Increased load on the hydraulic transmission will help to detect possible defects and hence will improve the quality of transmission repairs.Item type:Item, Simulation of Locomotive Repair Organization by the Methods of Queue Systems Theory(Дніпропетровський національний університет залізничного транспорту ім. акад. В. Лазаряна, Дніпро, 2018) Bodnar, Borys Ye.; Ochkasov, Oleksandr B.; Bodnar, Yevhen B.; Hryshechkina, Tetiana S.; Ocheretnyuk, Maksym V.ENG: Purpose. The article is aimed to evaluate the influence of locomotives` operation and reliability indicators on the system of locomotives repair organization in depot, using the methods of queue theory. Methodology. The article describes the locomotive repair workshop using the terms and concepts of the queue systems theory (QST). The tasks solved during simulation of the repair workshop operation are formulated, the list of initial data and simulation results is given. A graphical simulation environment Simulink was used as a software simulation tool. Findings. It was established that the main indicators of locomotive depot operation are affected by the volume of traffic, the reliability of locomotives, the rule used to select locomotives from the queue, the number of operating repair bays. The developed model of the depot repair workshop will make possible rational planning of the repair workshop`s equipment use, the human capital, the time of putting the locomotives into repair taking into account the workshop loading uniformity, as well as to improve the repair parts supply logistics. This model in a simplified form describes the repair process of the main diesel locomotive fleet, and can be supplemented depending on the repair type performed in the depot. Originality. The paper presents the locomotive repair depot as an object of the queue systems theory. The simulation model of the locomotive repair depot was developed. It allows analyzing the influence of various factors on the system of locomotives` repair organization in the depot. Practical value. The obtained results make it possible to determine the influence of locomotives` operation and reliability indicators on the organization of the locomotive repair depot operation. In further studies, the developed model can be used to improve the system of repair organization on the railway network when introducing new series of locomotives and changing the strategy of their maintenance.